A BLUE SHADE COMES ON DOCUMENTS SCANNED

Try adjusting the contrast and brightness settings when you scan. If the contrast is set wrong it will pick up the shade of the white paper.

Going with it's an Acer Aspire 5315 Notebook PC, which according to Acer Support comes with Windows XP (Home or Pro), or several basic versions of Windows Vista,

http://support.acer.com/acerpanam/notebook/0000/Acer/Aspire5315/Aspire5315sp2.shtml

WinXP:
1) Desktop screen

2) My Documents; Click on Start, then on My Documents

3) Downloads; Click on Start, then on My Documents. DOUBLE-click on Downloads.

Win Vista:
1) Desktop screen

2) Documents; Click on the Windows logo button, then on Documents

3) Downloads; Click on the Windows logo button, then on Documents. Then click on Downloads.

Anyway you can try scanning a document again, and see where scanned files go? Then delete the scanned file.
Look at the window, and what is stated at the top. This is where the scanned file will go.

Regards,
joecoolvette

Either your monitor or the video card inside the computer is going bad. To isolate the problem connect another monitor to the computer. Borrow a monitor from a neighbor, friend, relative or co-worker and connect it to the computer. If the Borrowed monitor displays ok that means your video card is ok, but your original monitor is bad. If the Borrowed monitor displays the same blue shade then your video card inside the computer is bad.

may i assume you removed tapes at the electronic side of cartridge?
shake the cartridges.

Now your computer should have a utility for settings the cartridge for
first time after loading them. Thisis to make sur the colors are mixing
to give the right shade.

Normally 1 single shade means the color cartridge is ending so may be you
double check you are not returning the same ending cartridge in the printer.

Hope that helped

Scanned documents normally get sent to your My Pictures folder within you
My documents folder. Look there and see if you can find it.

Hi
Supports user-specified installation
Removes unwanted blue cast from scanned color images.Update your Driver , Click the below link for your scanner Model
http://driveragent.com/archive/10242/64-1-531?q=microtek+3880+scanner+displays+blue+shade

Have long experince with PixEdit program using Kodaks. PixEdit usually comes around it after a firmware upgrade on the scanner. Not sure about this specific model but at least OK on other models of Kodak.

Hello,
It may be due to the loose contact of the monitor signal cable
Contact the nearest Repairman

Let me know that your problem is solved and rate me as Fixya!

You have to take the machine to service partner who can be found on the brother homepage of your country.(www.brother.com)
The scanner needs calibration which can only be done by service personel.

Color Cartridge problem, low on cyan ink...