The calibration is so badly off that when I hold my finger down on Top left hand side it sets off the search option
SOURCE: Screen Calibration problem with SteetPilot c330
Turn off the unit. Then hold down the power button for about 1 minute and the calibration screen will eventually come up.
SOURCE: Nuvi 680 touch screen problems
If you keep holding the button down it will go past the pre-boot mode and you'll eventually come to the calibration screen. Please see this link for more info:
http://www.sharc.net/discus/messages/6/77.html?1236709210
Also see this link on how to het your touchscreen replaced:
http://www.sharc.net/gps_LCD_repair.htm
- Jim
SOURCE: Cant calibrate my Garmin Nuvi 255 GPS
You have the wrong procedure. Please see this link:
http://www.sharc.net/discus/messages/6/77.html?1236709210
- Jim
SOURCE: Failed to calibrate keyboard of my Nuvi 205w
Please see this page for recalibration procedure. If that doesn't work, then then the touchscreen needs to be replaced.
http://www.sharc.net/discus/messages/6/77.html?1236709210
http://www.sharc.net/gps_LCD_repair.htm
- Jim
SOURCE: my garmin nuvi 1350 LMT
There should be a black dot to press on the calibration screen. Keep pressing the dot as it moves around the screen, you may need to press very firmly and use a stylus until it says calibration complete.
This usually occurs when a unit is dropped or left in extreme temperatures or jammed it a glove box or console with things jammed against the screen. It could also occur if you are touching the screen as you start.
Thanks for using FixYa
693 views
Usually answered in minutes!
×