Why the Panasonic Washing Machines error code "h 02" displaying?

Door latch, lid switch, drain pump. Etc. It requires troubleshooting. Is there water in the unit?

http://www.ukwhitegoods.co.uk/help/fix-it-yourself/fault-codes/laundry-fault-codes/3328-panasonic-na-series-washing-machine-fault-codes.html

H01
Pressure sensor or level switch detected as out of range

• Check wiring to level sensor
• Check pressure switch is not defective
• Replace pressure sensor
• Replace main power PCB

You water drain line needs to be curved above top of tank Water finds its on level The water level is stuck on the full position shake the washer lightly with water inside to release it. It works almost as a toilet tank.

U11
The washing machine cannot drain

• Check that filter is not blocked or obstructed
• Check drain hose is clear of any blockage or obstruction
• Check wiring to drain pump
• Check drain pump is not defective
• Check level sensor or switch
• Check wiring to level sensor

This is a code for an internal leak. Same happened to us today 2 weeks after buying the machine from John Lewis. We had a small pool of water appear in front of trhe machine. Waiting for Panasonic to sort out a repair.

Its simple..just follow step by step as below:-

1. Switch off and unconnected both power & water supply.
2. Lay the unit with the back side facing up.
3. remove the back & bottom panel
4. you will see the valve on the bottom tub.
5. Unscrew the valve cap.
6. Dismantle the valve by release the connector between steel bracket & hook (white plastic 'T' shape) using small 'playar'
7. Then you will see a 20 cents coin ( keep into your tabung gajah)
8. Use the old toothbrush to clean the black rubber valve.
9. Assemble everything.
10. Thats all.
11. 
    

tell him not to do that

u11 is not a valid error code - please recheck.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

First my washer stopped working during the spin cycle, and some of the water still in the tub,i have to wait for about half an hour to have the whole process done after continuing the washing process,then after 2 weeks not doing any laundry, when i tried to switch on the on/off button,it doesn't do anything at all!I tried changing the plug fuse(thinking maybe it needed to be changed after 4 years using it) but nothing happened.please help me . TQ