NEED A WIRING DIAGRAM FOR A PRAMAC PROTECH 6000 FITTED INTO A GROUNDHOG UNIT

Question edited for full make and model.

Wiring diagram not supplied for the 7500, but there is one for the 6000 model.

https://www.google.com/search?q=All+Power+America+APGG7500+generator+wiring+diagram

..

Hopefully this will help you some what,,

https://diagramweb.net/john-deere-310-g-ecu-wiring-diagram.html

Question edited into written English, 'no' and 'know' are two different words. And did you mean King Craft? There is none called 'Kraft'. Also model numbers are need in such questions, 6000 watt is just the output. some help in the link, but no idea if it is relevant to what you have.

https://www.google.com/search?q=kraft+6000+watt+generator+wiring+diagram

The correct search query for this is;

make model wiring diagram

nothing else..

get the service manual from them
no way to fix a hacked 6000w generator.
engine RPM and HZ correct and voltage taps.
wired wrong is huge danger to all.
for sure grounds connected wrong./
or 250vac to any 120vac load devices.

here they are ask them

https://www.pramac.com/product?id=2539&folder=94

possible defective oil switch. see your manual

https://manualzz.com/doc/2057104/hotpoint-vtd-6000-clothes-dryer-user-manual

Here's your diaGRAM

That 10 seer heat pump is typically wired.

http://rheemote.net/docstore/webdocs/Public/ServicePublic/Trouble2/pdfs/Wiring/90-21779-08-06_HP_Typical.pdf

These were typically installed as the cheapest thing available to a homebuilder, mainly installed in rentals and affordable housing. Naturally, they cost the most to run. A higher efficiency unit will pay for itself in a couple of years and then save money every time it runs after that. Of course, replacement parts are inexpensive, so this is ideal for a rental property.

Try a shot of starting fluid. If it does not start with that it may have a fuel supply problem.

Hi, you can try these sites, they have one for sale.
http://www.m-and-d.com/GEN-47361.html
http://generatorpartsdirect.com/manual6247-8.aspx