I need the belt for it...who sells these belts please.

I had a machine like that and the belt was shot so I took the belt off and took it with me to a store that sells belts and they matched me up and it just happened it was the right one.

We do not have parts manuals and we do not sell parts. Please take the belt to a local vacuum cleaner repair and sales shop, they can supply the belt for about $7.00

If you can take the old belt to a store that sells belts for lawn tractors and have them match the one you need. I have done that and it works even if the old belt is ruined.

if you have the old belt the size is printed on the back
if the printing is gone then take the old belt to a belt supply shop and they will measure it and sell you the correct belt
If the belt is gone completely then take the mower details along to a mower shop that sells murray mowers and they will have a genuine belt for you

Here are a couple sites that sell the 4x21-3/4 belt sander belts.
http://www.2sand.com/Sanding+Belts/Shop+by+Size/4+x+21.75+Sanding+Belts/

http://www.buysandpaper.com/servlet/the-Abrasive-Belts-cln-4%22-x-21-dsh-3-fdsh-4%22-Abrasive-Belts/Categories

surely there are mechanic shops and auto spares shops that sell belts in malta
take your belt as a sample and get on e the same

you should be able to buy it at any walmart store. they sell the belts separately by two's. they usually range about three dollars for two. Pay special attention to the make and model and the belt type that is required. Thank You .
Please indicate if this helped at all..much appreciated

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=723179
Generic problem for all Vacuums
Need a replacement belt for
Posted by madasalorry on Jun 30, 2008
Need a replacement belt for upright Hoover durabrand

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The best place to get a replacement belt for a Hoover DuraBrand vacuum is to contact your local vacuum cleaner dealer in your area or to contact the factory @ Hoover listed below and call cust serv and they will direct you to the parts dept. but, please use the genuine belts instead of replacement belts and the average belt change for flat belts is every 4 to 6 months and if it is a geared belt than once a year for the best cleaning. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST
Thanks, Don the Vac Man
Go Ahead. Use Us.

I am not sure of the question about the belts. This is information I have found and maybe I will answer your question.

This link is a parts breakdown of your machine.
http://sebo.com.au/downloads/9547AU_9548AU_9549AU_1.pdf

Reference # followed by part # then description.
153 - 5463 Belt 2MR-310-6
154 - 5110 Belt 219 3M-HTDII-6

The following link is to contact Sebo, If you need to order belts, they may sell directly to you so contact them and give them the part #'s I supplied. If they wont sell directly to you, they should give you information on who around you is a Sebo dealer and will have belts to sell you.
http://sebo.com.au/component/option,com_facileforms/Itemid,29/
Hope this helps, please post back.

I have a Regal Kitchen Pro Bread machine K6773 that I'm junking. I'll sell you the belt for $5 + $5 shipping. Contact me at [email protected]