How do I replace the grill element in my Rangemaster Toledo 110. One side has stopped working

Hi Tim,
I suppose it is the cooker of the photo, a Rangemaster Classic.
These doors open on the side.
There are 4 screws who fix them.
Unscrew them and you can take the door apartThe link is for the user manual. On page 18, fig 6.3 and 6.4, you find more information.
http://www.rangemaster.co.uk/media/868812/toledo-lidded-110-dual-fuel.pdf

Have a nice weekend, Dik

CALL GAS-ON SPARES ON 01215857799 THEY CAN SUPPLY OFF THE SHELF.

Usually fairly straight forward. Remove the blown element being careful not to loose the wires into the void behind the grill. Insert new element making sure the orientation and wires are conected as the original was.

If grill element not working, switch power off and remove back panel to gain access to wiring. Grill element will be toy element. look for any burnt wire, either blue or brown. Re attach where broken and reassemble. If you have any doubts call a technician. Not to difficult though.

how can i replace the manual for this model

It’s basically as simple as:

Turn off the gas supply to the range.
Turning off the mains power to the range.
Remove the back panel behind the grill.
Remove the 2 power connectors to the grill element.
Remove the earthing wire to the element screw terminal.
Unscrew the grill element securing screws(s) - there will be 1 or 2 depending on the element fitted to your range.
Refit the new element (make sure it has the same mounting screw holes as the one you want to remove) then secure it.
Reconnect the earthing wire to the element screw post.
Make sure that neither of the element tags touch the chassis - check with a continuity tester of ohm meter and adjust if required.
Reconnect the power cables to the element.
Reconnect the power and check that the element works correctly.
Disconnect the mains power again and replace the rear panel(s).
Reconnect the mains power and recheck that the grill functions correctly.
Turn on the gas supply.

I have the same problem. The installation and service guide details how to change the grill element but does anyone know what the part number is for the grill element?

Hold down two left hand buttons together for a long time. that should do it.

We have the same problem on a Rangemaster Toledo 110. It is not a fuse.
The 'Hot' light still comes on because that is a different (parallel) circuit.
Examination by a competent electrician has found that the soldering for the wires that power the warming metal strip under the glass is faulty. You will have to ask for a replacement part.
There may be a design flaw, so you might want to enquire about the professional all gas burner top and just use the griddle as a warming plate over the second wok burner.

Good luck.

Hi,

How easy is it to fit a new grill element. The element on the left hand side of the grill is not working so I need to replace this. I'm just wondering if this is easy to do myself or do I need an
electrician?
Regards
Sandra