I have just moved my printer to a new premises and it is coming up with error code 016-311

I moved you to CANON
all printers do that, they love to jam that is there (THING) there bailiwick.
paper dust and chunks land in places not allowed to be there
but guide jams or optical sensors blocked even with paper dust.
If you ask a printer tech this, (mobile) what do the do most the time
they do cleaning endless.
I use shop air here and blow them all out clean as new.
also cleaning up ink smears. using IPA
or use CON_O_AIR , and blow it out.

wash wear clog and repeat. endless printer woe's.

how long did the printer run days,year? before now.????
history matters. (new out of the box?) and this good example.


https://appuals.com/canon-printer-error-c000/

Koday Hero 7.1 carriage jam. Stuck to the left side. No paper jam can be found but can't get the carriage to move.

You will need a new carrage motor for this, better off with a we printer.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

The error is caused by the home sensor for the accumulator belt not finding the home position of the belt. Since the error occured after a move, toner probably contaminated the sensor. Use canned air and blow out the sensor. Manual @: www.lpscomputer.com/ec/Phaser_7700_Service_Manual.pdf
to locate the sensor. The other possibility is that the accumulator belt bit the dust. Parts a vailable at: http://www.lpscomputer.com/p-2993-1-016-1889-00-accumulator-belt-assembly.aspx

6202 error code means that the scanner motor failed

to solve this

-Open the printer access door of your printer
-Unplug power cable
-then after 30secs plug the power able back
-If the printer is already power-up the message printer access door will appear
-Close th printer access door
-try to scan or print

If this issue not solve call tech support of kodak Toll free 1 800 421 6699
-

apply a C4 shaped charge to the door of the safe , cover with a ballistic blanket , dentonate and remain in the building till the police come .
Hope this helps :P

This error shows that there is too much noise / interference on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Check that the phone cord is plugged in correctly on the printer and in to the telephone Jack. Also check that the phone cord is not damaged in any way. If you have other devices sharing the phone line on the premises or sharing the phone socket than disconnect them to see if this allows the fax to be sent successfully. This could also be a general problem with the phone / fax line outside of your premises and could even be at the receiving end. Try faxing a message to someone else. Then retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.

Reseat the cyan PCU .

you just diagnose your printer of their software tools...so that you can identify the error made...or just look the manual on how to reset the default setting of the printer....

CODE C0900, DOES NOT PASS COPY, FIERY FRONT COVER BROKEN OFF AND VERY DIRTY, also you may want to try and look at the 3rd drawer lift perheps there's somthing blocking it