SAMTRON 55V 15" CRT Monitor Logo
Posted on Jul 17, 2009

Picture is rolling

Monitor is dead

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 3 Answers
  • Posted on Nov 27, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Nov 27, 2009
Answers
3
Questions
1
Helped
8971
Points
6

Pinout : Pin Name Direction Color Description
1 RED OUT Red Video (75 ohm, 0.7 V p-p)
2 GREEN OUT Green Video (75 ohm, 0.7 V p-p)
3 BLUE OUT Blue Video (75 ohm, 0.7 V p-p)
4 ID2 IN Monitor ID Bit 2
5 Gnd Ground
6 RGND Red Ground
7 GGND Green Ground
8 BGND Blue Ground
9 KEY Key (No pin)
10 SGND Sync Ground
11 ID0 IN Monitor ID Bit 0 GND=Color; NC=MonoMonitor ID Bit 0
12 ID1 or SDA IN Monitor ID Bit 1 NC=Color; GND=Mono Some systems only uses ID0 for monitor ID
13 HSYNC or CSYNC OUT Horizontal Sync (or Composite Sync)
14 VSYNC OUT Vertical Sync
15 ID3 or SCL IN Monitor ID Bit 3

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to stop pic rolling on slave monitor

hi i really don't understand what you mean, and here it is only for cameras !
1helpful
1answer

How to stop rolling vertial picture on a monitor

Check the contrast setting if too high this could cause your problem
0helpful
1answer

Lacie electron blue desktop rolls over top of monitor

I agree--you need to first try another monitor. Sounds like a monitor problem to me.
1helpful
1answer

My hp dv6700 no monitor display

May have a bad driver. Boot windows in safe mode and if you get a picture on the screen, then go to the control panel, open the device manager, and find the monitor. Once you find it, roll back the driver. If you cant roll it back, then try to update it.
0helpful
2answers

I have a picture, but the the screen goes blank and i have to hit the power button appx 20 times for the picture to come back up. then it stays up for about a minute thwen i have to go thru the on/off...

All screens on earth do that, if the PC desktop is dead, all do , it goes to ITS very own sleep mode. and black screen in 15 seconds. after PC dies, or is PC already dead, not connected or cable to PC is bad. or both ends connected wrong..
#2 cause is CCFL backlamp tubes dead.
2007 year made has those CCFL and most are dead now. or even only 5 years old they die.

to prove that , CCFL deal. dead
when monitor is cold, and no Power
power it on (its button) only, no PC needed
and push the menu button under 15 seconds
does the OSD menu pop up, if yes monitor is not dead.
or do this test any time that" 20 times dead "thing happens, do the OSD test first.

CCFL deathh symptoms.
dead tubes, all or 1/2 the screen
dim tubes
intermittent, and random dead
fails only warm or cold, only. thermal.
yellow tinged tubes, white = yellowish.
bad luck and any CCFL can fail, for lots of reasons. we
use a flash light pointed at the screen to see , OMG there is data there. the menu button does work , only CCFL are dead.

now the acid test gee test the monitor on a 2nd known good PC.
what can be more easy and best test.
if that simple test works, then the PC#1 is dead, we then fix it next.
the secret is he OSD is inside the monitors brain, no PC needed.

danny tell your story and do the tests first

see data? ????? PC good, or OSD is up for 15 seconds,?

flash-glow-magic2-undefined-undefined-0_5.jpg
free manual

https://www.manualslib.com/manual/145335/Samsung-Syncmaster-920nw.html?page=11#manual
0helpful
2answers

Picture delay on power up. Goes through several power cycles before picture is displayed on screen.

U have tools like a soldering iron,desoldering pump or a roll of desoldering braids,a roll of solders?U know basic electronic and also basic soldering?Yes,take the tv aparts.Check the power supply baord for dying soon to be dead parts call capacitors.That the board,that where the power a/c cord plug into it.These dying capacitors soon to dead on the power supply board are alway bulges up or puffing up on it tops.Replaced these dying capacitors,will solved ur tv delaying power on to the tv.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
1helpful
1answer

Why does the picture roll on my pc

Well most likely it's either of the two below:
  • Driver issue: Download the latest video driver for your PC from the manufacturer's web site.
  • PAL/NTSC issue: Try changing the video standard on your monitor to NTSC is was already set to PAL...or vice versa.
0helpful
1answer

I DON'T GET A PICTURE WHEN I HOOK UP MY LAPTOP TO MY TV MONITOR.

on your laptop keyboard, press function button & monitor button at the same time .
0helpful
1answer
0helpful
3answers

Hp flat panel monitor looses picture

Here
Here
and Here
I've tried all the aforementioned fixes, and my conclusion is... when your monitor's dead it's dead. Go to NewEgg and and get a new one.
Not finding what you are looking for?

321 views

Ask a Question

Usually answered in minutes!

Top Samtron Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samtron Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...