No power to camcorder ev en with charge plug in

That is a full home back-up unit. You need dealer support. Contact them direct. There is nothing online about re-flashing.

Support For Your 0058711

Generac Power Systems https://www.generac.com > product-support-details

File Type Manual (PDF) Item Number Langu... Emissions Warranty Statement WARRANTY STATEMENT EMSN E P3 0J3335 EN Exploded View (Control Panel) EV CONTROL PANEL ? HSB 0J3707 EN Exploded View (Enclosure) EV ENCLOSURE HSB 2011 0J4730 EN View 29 more rows

• 
  

  Product Manuals

  https://www.generac.com > product-support-lookup
  Model Number: G0058711 Description: 10KW/530 GUARD+12C T/SW ... Parts Manual / EV (Unit), EV GENERATOR - HSB, 0J3899, EN.
• 
  

  Find My Manual, Parts List, and Product Support - ...

  https://www.generac.com > service-support > product-...
  Enter your model or serial number to find Generac specifications, manuals, parts lists, FAQs, how-to videos, and more for your product.

fixya doesnt help choose-- sell--buy--do comparisons--appraisals-of items or equipment --try consumer reports or online search

many camcorders have a power pack that attaches to the camcorder and then the battery attaches to the power pack you can also put the plug in and run the camcorder when everything's attached

This link is the manual: http://resources.jvc.com/Resources/00/00/97/LYT0538-001A.pdf
This is the battery you will need: http://www.camcorderbatteryshop.co.uk/contents/en-uk/d186_BN-V11_jvc_battery.html

You need to first Charge your camcorder battery pack.(mine had to charge over night) the first time.  Plug the little arm that extends from the camera into a USB 2 port on your computer and make sure your computer stays ON during the charging, otherwise the camcorder will not charge.

A red light will come on during charge and goes off when charged. If it does not come while plugged in try a different USB port.  Screen should light up temporarily and Red light showing charging on front of camcorder.

 

IF YOU HAVE ALREADY DONE THE ABOVE, and are having the problem, pull the battery pack out and reseat it back in there again.  maybe connection not good.  OH, and I think mine had plastic covering the metal connections you may want to check that too -remove if so----- BUT the entire white plastic around the batteries STAYS IN PLACE do not remove that. 

 

If that still doesn't work I would try regular AA batteries in it if in fact you have The FLIP ULTRA HD it will take regular batteries too.    IF they work - then maybe you got a defective Rechargeable Battery pack and should contact Flip Video at   http://www.theflip.com/en-us/  

 

I have the same problem. The battery is charged, but the camcorder will only work while plugged in. It worked for a while on the 1st day, Christmas, then it would only turn on while plugged into the charger and would stay on after charger was disconnected. Today it will only stay on if plugged into charger.

I have a PDF of the schematic i drew for my bike. it is posted on the Yahoo power-assist group. look in the files section.

http://tech.groups.yahoo.com/group/power-assist/files/EV-Warrior/

there is also a text file there that lists all of the wiring connectors and where each of the wires goes. as well as connection diagrams for the Curtis 1505 speed controller.

the charger circuit is very simple. the black and red wires from the charger port go straight to the batteries +24V and 0V terminals. the third white wire connects through a bullet connector to pin#7 (EPO wire) of the Curtis speed controller. this acts to turn off the motors while the batteries are being charged.

inside the charger male connector the pin for that 3rd white wire is shorted to ground. so when you plug the charger in the white wire is grounded thru the charger plug.

have fun. i really enjoyed my EV-Warriors while i could still ride them.

rick

Hi,
your NG3 should have been preprogrammed for the type of batteries you are charging. The NG3 has the 3 wires from the power cord. Here is what I have done:
Brown from charger goes to black wire
Blue goes to white wire
yellow green goes to green ground.

the camcorder should come with a cord to plug into a power point, it will charge once plugged in. Normally they take 3 hours to charge with a main power supply.

are you trying to charge the battery while on the camcorder??? does the camcorder work when you plug the camcorder into the charger?? If the battery fails to charge while its on the charger it can only be the charger but most likly the battery. If the camcorders dead it could be the dreaded pana cap think thT HAPPENS TO MOST CAMCORDERS AFTER A LITTLE AGE. good luck