Samsung BD-P1500 will not play blu-ray discs

Connect the ethernet cable to the backside of the samsung bluray 1500 player ethernet connection with the bluray player power on with no disk & it will automatically update your bluray. It should be work fine after update your bluray. Good Luck!

http://www.samsung.com/au/support/detail/supportPrdDetail.do?menu=SP01&prd_mdl_cd=BD-P1500%2FXSA&prd_mdl_name=BD-P1500&prd_ia_sub_class_cd=P

OR GO TO
www.samsung.com click Support then Downloads and enter your model number. There's instructions for downloading firmware and loading via usb stick or cd.

Hope this helps!

try another disc. if the problem continue and still in warranty, have it replaced.

HELLO

Try this! Type your player and model number into Google on the net and I'm sure somewhere there will be a hack posted for it. You can also try Videohelp.com

What have you got to lose?

All the best with it.

I'm having the same problem. had my Blu-ray and my cable box plugged into my reciever. Blu-ray kept cutting out and not finding a signal while watching my Rome DVDs. I swapped HDMI cables by just switch which cable went out of my blu-ray ( I didn't change what ports they were plugged into on the reciever. That cleared up that problem. I'd assume it was a faulty HDMI cable except that it works fine on the cable box. Anyways, we were watching Iron Man on Blue-Ray and it starts to skip about 2 thirds through the movie. Same as you I updated the firmware, disabled BC-Live, No luck Don't know if the problem is hte Bluray player , the reciever or what. Everything is up to date so I don't get it at all.

Hey AJ,

Follow this link: http://www.samsung.com/us/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=BD-P1500 Click on firmware under the downloads tab. Download the upgrade guide and it will instruct you on how to burn off a copy of the updated firmware for this model and load it into your player. It should take care of your issue.

Rob

All disc players have a thing called stacked tolerance. What it boils down to is some transports in players will not play certain discs; plain and simple.

All you can do it test it out on another BD player to make sure the disc is fine and test another disc in your BD player and make sure it hasn't gone defective.

Sorry I don't have an easy fix, this is not an uncommon problem.

The non-blu-ray laser lens needs cleaning.

Try not to use a blast of compressed air.

Radio Shack has a lens cleaner ($13). it is an audio CD with a row of brushes on it.
Read & follow the directions.

I believe on startup, you need to hold the fast-forward button on the unit, until you see something about reset in progress...

Cheryl

Has your husband verified you have the most current Firmware for your unit? this should take care of your issue

http://www.samsung.com/us/support/download/supportDown.do?model_nm=BD-P1500&mType=FM&vType=L&disp_nm=BD-P1500