Took a taco reader out of a l200 but don't know where the wires go as speedo don't work

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few reliable -store for eg. .. let me know if u need help
thanks

These bikes don't have speedo or taco cables...it's all done with wires electronically.

sounds to me your cluster is out

check connection at the trans housing for speedo problem as for lighting ahhhh what a headache so many problems from connections to bulbs or fuses

check for an earth wire or connection in the harness that has the earth wire and make sure that it is attached to the body

If you use a memory card in your camera, all you need to download your pics is a separate card reader. You don't need a driver and you can drag and drop your pics into a folder you create on your desktop. From there, you can send the pics to iPhoto or anywhere else you prefer.

the tacho runs off the altenator on the diesel variant ,but runs from the ECU on the petrol model look at one thats fitted as original and see hows its wired

I have a 1991 nissan primera 4wd, I have been fixing it up for a couple of months and i went and took it for a test drive the other day, that was when i realised my speedo wasnt working at all, it wasnt lighting up when i turned on my lights and the needle wasnt moving but the taco and everything else on the dash is working perfectly fine. How do i fix it?

Set tempture up some so the water will be hoter.

speedo went to zero km, indicators in dash work opposite, taco isn't working either.