I have a phililps tv, need to program my Cincinnati bell fioptics to my tv. Volume

You would first need to access your network. If you have wifi then scan for your wifi network name and select it from the network setup menu. Then you will need to enter the network password. Once that is done you should get a message on the screen that you are connected. If your tv does not have the Netflix button on the remote then you will need to find it in the apps section of the menu. Once you have accessed Netflix follow the log in menu.

Instructions

1. • Contact Cincinnati Bell Wireless customer service from another phone by dialing 1-888-391-3925. Ask to speak with a customer-service representative.
     
   • 2 Inform the representative you need to switch service providers and need the correct code to unlock your phone from the network. You do not need to specify a reason. Keep in mind that Cincinnati Bell does not have to release the code, but generally, if you are moving to another location not covered by Cincinnati Bell, the company will release the code.
     
   • 3 Give the representative the make and model of your phone, along with the IMEI (International Mobile Equipment Identity) number. You can obtain your IMEI number by pressing #06#. The representative will retrieve and divulge the unlock code.
     
   • 4 Put the SIM card from your new provider into your phone and turn it on. The screen will automatically ask for the unlock code. Input the code to unlock it, and your can begin using the phone.
     

Courtesy: How to Unlock a Cincinnati Bell Wireless Phone ' eHow.com http://www.ehow.com/how_7652326_unlock-cincinnati-bell-wireless-phone.html#ixzz1jmmG9z4v

Unlocking your Dell Streak 5 from AT&T is easy but if you use it on T-Mobile, only 2G will work and not 3G. However, if you get a Dell Streak 5 locked to Cincinnati Bell and unlock it, it WILL work on T-Mobile 3G.
How to unlock Dell Streak 5: http://www.unlockstreak.com/pages/download-dell-streak-unlock-software
Cincinnati Bell Dell Streak unlock info (if you need this):

Here is what I did for my Bose Solo Tv to work on the Bell 9242 receiver.( see page 17 of Bell 9242 guide) 1. Hold down the aux button until all lights flash. 2. Press 2 to ensure Aux is set to audio. 3.Enter code 761 and press the pound (#) button. Now to have the satellite remote default volume to Bose Solo do the following. 1.Press and hold AUX 2.press # pound 3. Press the + side of volume 4. Press 0 5. Press pound ( AUX button will flash 3 times) 6. Press SAT mode 7. Test the volume on Bose Solo. (see page 22 of Bell 9242 guide)

Guest

I have provided instructions on how you can program your remote to your TV. The first link is the instructions to program. The second has the available codes for the TV brands.

Program remote:http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

I hope this helps.

Ray Calo
DISH Network

Call ATT and ask them what the Unlock code is - and if you have an account with ATT than they will help you - if not - than They might not.

Or Call Cincinnati Bell to see if you even need to unlock it.

hope this helps

thanks

Hi try this
Emerson 526, 534, 536, 541, 573, 590,
627, 636, 642, 648, 652, 654,
655, 657, 658, 659, 660, 661,
662, 665, 666, 667, 669, 670,
677, 679, 682, 692, 696, 699,
720
http://www.bell.ca/web/tv/en/all_regions/pdfs/deviceCodes.pdf

good luck please rate

Hold The Clear Tv buttom until all 4 light flash red , then press code search at the bottom right , then the up arrow until ur tv goes off and finally record , after that u only need to press the red tv buttom to open it or close , If it doesnt open it back its because u press the up arrow after the tv was shut off so do the same thing be using the down arrow . Bell doesnt even know how to manually find the code with their own remote :(

OK DIS IS THE WEB INFORMATION
ACCOUNT NAME:CBW Internet
HOMEPAGE:HTTP://GOOGLE.COM
CONNECTION MODE:TCP WITH PROXY
PROXY ADDRESS:216.68.79.202
PROXY PORT NUMBER:80
TIME OUT:150
NETWORK PROFILE:CBW Internet