At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Broken at the hood?DO NOT use Ford parts.Best repair is ......go to a "upull parts lot" this is where you remove the car parts yourself,find an older Hyundai Accent 2003 2004 style and pull the windshield washer hood squirters and hoses off the hood.They will fit right on your 2010 Focus hood.Bonus.... they will never break apart like the plastic Ford ones.Just attach the Hyundai rubber hose onto your plastic feed line on your Focus on the passenger side.
the wigwag switch may need to be serviced. have someone come look at it and watch what they do taking it apart... when they have it apart and tell you what is wrong... and what they are going to charge to fix it, if the repair is more than $50 tell them you will just fix it yourself.(the part is $23 at the local applience parts center)
this hapened to me years ago it was an easy fix I took apart my washer ther should be a belt that almost looks like a belt off a car it probably went off track once you get it apart try spinning the belt you should be able to fix yourself
you need agitator dogs, should only run a few bucks. You can order them at marcone.com with your model #, then take the agitator apart and replace. very easy repair you can do this yourself
A loud whinning or rumbling sound when it is in the spin cycle means that the bearings in this washer has failed. It is an expensive repair since the washer has to be torn complete apart to get to the bearings. Also, the manufacturer does not sell you just the bearings and seal but, you must buy the rear tub with the bearings which raises the cost of the repair significantly. For example the rear tub for this washer can cost $250 not including the shipping. So get a few estimates before deciding whether to repair or replacing the washer.
But, if you have the mechanical ability to do the work yourself and you are interested in getting the bearings and seal parts to get your washer going again. There is this site that has videos describing what it will take to fix this washer and will sell you the neccessary parts. The link to this site is: http://www.hometask.com/washerrepair.aspx
There are NO Fuses inside this or any Dryer. This is only a symptom, it may have several "Causes" it is the "Cause" that must be attended to. The FIRST thing to do is get a manual. Links at end. The links below, will help you troubleshoot, and repair.
http://fixitnow.com/wp/2005/09/23/whirlpool-duet-kenmore-he3t-washer-repair-manual/
There is alot of unit that I personally repaired for the same problem. I designed a quick fix for it without changes the hinges. It is a little bit technical. The door has to be to took apart and in will need three washers on both sides of the hinge. this will be a $1.00 do it yourself fix if you dont have any coverage.nyc appliance repair can fix it for you.
Sounds like a faulty seal around the gun. Repair might be few bucks if you take it in. But the price of the part is probably under a buck. Depends if you want to rip apart it yourself.
Hello! This is similar to the Red Lights Of Death. But instead of your CPU having a bad connection, it's your GPU. There is a 3 year warranty on the 360, so call Microsoft and get it repaired or replaced. If the warranty seal is broken you can take it apart and replace the x-clamp with 4 screws, 8 fiber washers, 8 steel washers and heat sink paste. Contact me for further instructions if doing it yourself. I hope this helps.
×