Nikon 4300 - Buttons Do Not Function

then its probabely a bad connection of the battery to the camera check that the pins of the camera are ok ie that they not bent

On your menu navigation buttons, push the left arrow to get to the timer. Then push up or down to turn the timer on. Then push the middle button to exit. Now position the camera for the picture, and push the shutter button. You will have I think about 10 seconds to position the subject. It's a cool function, have fun with it!

Hi there,

You can turn the flask off by pressing the flash mode button, it looks like this: You will see when the flash is off when an image is displayed on your screen which looks like this:

Thank you for using FixYa! Have a nice day and please remember to rate this solution.

Warm regards,
BearWeb

Since you can't get into the menu, let's try a manual reset. Remove the card and the battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.

There is a button beside "menu" that has a lightning bolt and an eye under it. Press it. Top-right corner of your screen, you'll be able to scroll through the settings.

Press the "MENU" button and navigate to the reset command and reset the camera. That may get the camera to function properly.

Some of those buttins work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.

If this is not the issue, please describe specifically which buttons are not working.

Sorry sounds like this is a hardware problem and you need to have your unit serviced.

In record mode, push the Flash Button (third button below the LCD screen). This will allow you to switch off the flash.

Try resetting the camera back to the factory default setting.
Remove the battery, leave it for 1/2 + hour, insert the battery and configure date time etc.
If it doesn't work then you have faulty camera.