My igloo ice maker is not despensing cubes, ice comes out one large blob of ice

There are video's on google that have trouble shooting for Igloo ice maker types and for the Igloo ice company and YouTube.

Most ice makers will use ordinary tap water.
Suggest check with Igloo for your model just to make sure.

How a Portable Ice Maker Works - NewAir

www.newair.com/articles/how-a-portable-ice-maker-works/

Look inside to find out how a portable ice maker works, and get some tips about ...Just fill a tray with water, stick it in the freezer, wait 30 minutes or so and, bam, ice! ...Power supply - if the unit won't turn on, make sure if it is plugged into an ... Leakingwater - If the pump is operating but no water is reaching the freeze tray, ...

Customer Reviews: Igloo Portable Countertop Ice Maker ...

https://www.walmart.com/reviews/product/15162429

WalmartIgloo Portable Countertop Ice Maker ... My wife is lazy and never refills the ice traysto put back in the freezer. ... Great ice maker for camping trips and parties. ... even though the thing is completely empty so it won't make anymore ice, and 1/3 of .... My satisfaction was quickly marred by the sheer volume of the water pump in ...

Igloo Portable Countertop Ice Maker - Walmart.com

www.walmart.com/.../Igloo-Portable-Countertop-Ice-Maker/151...

Walmart
Rating: 4 - ‎350 votes - ‎In stock
Buy Igloo Portable Countertop Ice Maker at Walmart.com. ... It features a 3.1L capacity water reservoir that can make up to 26lbs of ice in 24 hours. You need not drain the melted ice ..... A. yes, the ice tray that hold the finished made ice is right about the water reservoir. .... A. Jogie: No, it won't make crushed ice, only cubes.

EdgeStar Portable Ice Maker - Troubleshooting Help ...

blog.edgestar.com/.../edgestar-portable-ice-maker-troubleshooting-help/

There is a probe that tells the machine it's full. Change it.

Check on the ventilation.

Maybe scaling has occured, get descaling chemical to clean it. Also remember to remove the dust accumulate at the condenser..

I would switch off the power, disconnect water and keep it so for a few hours. While power off, clean whatever visible build up you find. And make sure you shut the water valve before disconnecting unless you want another project! After a few hours connect water and power and wait until ice made. Goodluck.

it may be caused cooling problem.