How do i change the number of rings on a secondary edge 120 phone?

It seems like you're trying to configure a phone system or a specific phone to have incoming calls ring on multiple extensions simultaneously or forward to another extension if not answered. The exact steps can vary depending on the phone system or model you're using. If you provide more details about the phone system or model, I can offer more accurate instructions. In the absence of specific information, here's a general guide on how you might achieve this:
**For Most Phone Systems:**
1. **Ring All Extensions:**
- Log in to the phone system's administration interface.
- Locate the call forwarding or call distribution settings.
- Look for options related to "Hunt Group," "Ring Group," "Call Distribution," or similar terms.
- Create a group that includes the extensions you want the incoming calls to ring on.
- Assign the group a number or label.
- Configure incoming calls to be forwarded to the assigned group number or label.
2. **Forward After Rings/No Answer:**
- Within the same settings area, look for options related to "Call Forwarding" or "Follow Me."
- Configure the settings to forward calls to another extension or voicemail after a certain number of rings or if there's no answer.
**Example for Asterisk-based Systems (such as FreePBX):**
1. **Ring All Extensions:**
- Log in to the FreePBX administration interface.
- Create a Ring Group.
- Add the extensions you want to include in the group.
- Set the Ring Strategy to "Ringall" or "Ring All Available."
- Specify the Ring Time (how long it should ring on each extension).
- Save the settings.
2. **Forward After Rings/No Answer:**
- Create a Follow Me setting.
- Add the destination extension(s).
- Set the Ring Time (how many seconds it should ring).
- Configure the Follow Me List to go to the next destination if there's no answer.
- Save the settings.
Please note that terminology and options might differ based on your phone system's manufacturer and model. It's important to consult your phone system's documentation or seek help from your IT department or phone system administrator if you're not familiar with the settings or if you're dealing with a complex setup.
Keep in mind that making changes to a phone system's configuration can impact its functionality, so it's a good practice to do so during non-peak hours or with proper testing to ensure everything works as expected.

The ring count is determined by the voicemail system. The Edge 120 is a phone, not a voicemail system. What voicemail system do you have on your phone line?

do you have the phone with an answering machine like:

http://www.generalmanual.com/Telephones/GE-25932EE1-Cordless-5-8GHz-Edge-Phone.htm

Or are you using a voice mail system on your phone line? If so, contact the voicemail company or your phone company for information on how to change the number of rings before the forward.

Good luck!
EJ Kudelka

first be sure to place the rings in the cylinder and check to see there is enough ring end gap so they do not bind when they get hot. The numbers/letters face up. The gaps should be placed around the piston so they do not line up.(120 degrees for the oil rings and 120 degrees for the upper and lower scraper ring plates) Of the upper two rings the lighter color ring goes on top, it should have a rounded edge top and bottom. The second ring usually will have a bevel , scraping edge down ( again numbers/letters face up). Before installing rings be sure to roll the ring around in the ring groove to look for binding spots. If you find a tight spot , use a point file or fine cut file to clean it up. be very careful when you install your rings so do not bend or break them.

You can not have 2 phones with the same extension number. But you can programm a "coverage" button on each phone. IF YOU HAVE A MERLIN MAGIX OR MERLIN LEGEND:

At the phone, press :
SPKR #00
Press a button, it will say on the display if the button is "Blank" or has another feature programmed on it. When you find a button you want to program, press it.
On your display will read "list features", press that button.
press the more button until the features listed are "Coverage". Press the button next to "Coverage"
now it will say "Primary", "Secondary" or "Group", Press "PRIMARY", then press the "enter" button on the display.
Next, enter the extension number you want to ring on your phone, and press the "Enter" button on the display.

When finished, press "HOME" to exit programming.

It has been a while, so I might have confused or flip-flopped the order of the extension/primary part, but you will see.

Repeat that for each users phone. Now, when their phone rings, it will ring on your phone as well, so you can pick it up.

IF YOU HAVE AN IP OFFICE:
GO into Manager, select the main extension, then go to the "Mobility" tab, check the "inteernal twinning" box, and select the 2nd extension. Save the config (will only be a merge)

Now when the first extension rings, it will ,make them both ring. If you make a call from the secondary extension, it will show as if you are calling from the main one.

To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished. hope that helps

HTtp://downloadcenter.samsung.com/content/UM/200905/20090518141926921/SGH-D880_UG_SEA_Eng_Rev_1.0_071119.pdf

FROM here download the manual ...then follow it ..

you need to goto the mobile settings and scroll to ringtones and select the ringing tone,volume and whether you want continuos ringing or not is there for you to choose.

Send will work on any phone lines
fax machines are often set to only answer 'secondary' ring tones, double triple or higher. When the line was repaired the phone company may have dropped the special tone off your secondary fax line number, fax will not answer without that tone.
Check in the fax answer settings, what the ring tone is, specific instruction on menu settings in your user guide,
Ring your fax line, and check the tone.
If single number fax/phone, check that the fax is set to asnwer all calls then pass on non faxes

No, distinctive ring is not available on this machine.