- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Why am I unable to program the RCA remote control to operate a component?
Why am I unable to program the RCA remote control to operate a component?
If you are unable to program the remote control to operate a component, review the following information:
Compatibility If
none of the programming procedures work, the universal remote control
may not be compatible with your components, based on the type of
infrared technology and the age of the components. Some RCA universal
remote controls will only work with components manufactured after 1990.
Distance If
you are testing the remote control after you have entered a code, you
may be too far away from the component or you may not have the remote
control aimed directly at the component. Because the remote control
uses infrared (IR) technology to communicate with components, there
must be an unobstructed path between the remote control and the IR
sensor on the component.
Code Entry Methods If the Direct
Code Entry method was used to enter the codes for your brand and the
unit is still not functioning properly, try one of the automatic code
search methods instead. During automatic code search, the remote
searches for the correct code to program.
Modes For the
remote control to know which component you wish to operate, you must
put the remote control in the correct mode by pressing the
corresponding component button.
Combo Units To program the
remote control to operate combo units, such as TV/VCR’s, TV/DVD’s, or
TV/VCR/DVD’s, use the combo codes in the Code List to program the
individual corresponding component buttons. Once programmed
successfully, the TV button controls the TV functions on your unit, and
the DVD or VCR button controls the DVD or VCR functions, respectively.
The codes in the combo section should be tried first, using the Direct
Code Entry method on the TV and DVD or VCR buttons. If this is
unsuccessful, use one of the Code Search methods to program your combo
unit.
Batteries Make sure the batteries are new and properly installed.
? 2:46
https://www.youtube.com/watch?v=MZd4yBivcZ4
Nov 10, 2008 - Uploaded by alpharedecho
... how to program an RCA Universal remote for operation with your TV. ... Still in able to work or my rca flat screen and my zenith. .. ive .... I'd do it over and over and the power button on the remote just turns off in the end?.
Helpful Resources for Magnavox TV codes. Press and hold ... Note: If some buttonsdo not operate your equipment, try one of the other codes for your brand. TV.
I have an impression vzon tv's might be rebranded Coby tv.
Otherwise it is hard to find any documentation online for the Vzon. Please try this manual out. Scroll down to the download link once you get to the link below.
RCA Universal Remote Control Programming Codes
Programming Your Universal Remote.
The remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes:
TV-000
VCR-000
Cable Box-000
AUX is programmed with VCR code 037
For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.
Programming a Device using Code Search:
Manually turn ON your device (TV, VCR, Cable Box)
Press and "HOLD" CODE SEARCH
Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
Release CODE SEARCH.
Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
Once the device turns off, press and release ENTER.
With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.
Programming a device using the Code Lists:
Find codes for each device and brand below.
Press and "HOLD" CODE SEARCH.
Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
Enter the three digit code from the TV, VCR or Cable Box code lists.
Release CODE SEARCH.
With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.
I have a V-Zon 26" Flat screen TV with terrible sound. I'm told that you can use external computer speakers. There is a phono jcak on the rear of the TV. Does anyone know how to activate that jack to use the speakers?
I would suggest you try and use the codes Direct has given you for Zenith, Goldstar & LG tvs. There a good chance that's who made the tuner in your tv. Hope this helps.
×