I need a Sony part A1300319A why can you buy one, Or get the board rebuild

customer care support SERVICE number+1-
-833'''272''''0777,,,,,,,,,,,call them
THIS SONY A-1300-319-A COMPLETE PC D BOARD IS DESIGNED TO WORK WITH SELECT SONYTELEVISIONS.

You are correct. What is the issue with the one that you have?

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. Do a search by type in the brand name of the device to the search box.

more loose inside your tv that is a reason for your tv shut off you need to resolder the printed board

Six blink shutdown is a common problem with this televion one of two switch mode ps ic have failed. The repair may cost somwhere around 150.00 to 200.00 to fix from a technician. If you want the specifics, i can provide them.

I have one for sale.

sony blink code 6 blinks means that your tv has no horizontal,no rasta check c515 and 516 and the jungle ic IC 206,SEVEN BLINKS MEANS,high voltage shutdown,hig voltage exceed 33k and the set go in safety shutdown,check power supply regulation and horizontal circuits.if you are not a tech have one check and repair your set.

seven blinks means high voltage shutdown it gone into safety mode you need to check power supply regulation and horizontal circuits


shaun

KV-32HS510 and KV-27HS420, seven times blink error code shows problem in Horizontal deflection circuit.

There are many possibilities like dry solder joints, weak capacitors, Horizontal transistor short or flyback transformer fried etc.

If you have little experience of TV repair and good solder skills and have necessary tools to test / check defective parts, then you can make it. you also need to have related service manual to see board location, schematics and part numbers.

Here you find sony blinking codes

SIX Blinks---No Horizontal (H STOP), no raster, goes to the blinking selfdiagnosis
function immediately. Check C515 & 516 and the jungle IC, IC206.

SEVEN Blinks---High voltage shutdown. The high voltage has exceeded 33k
and the unit goes immediately into safety shutdown. Check power supply
regulation and horizontal circuits.