Dial out always busy

fast busy signal (plural fast busy signals)

1. (telephony) An audible signal on a voice phone line that sounds more frequently than a standard busy singal, indicating that notransmission path to the called phone number is available.

What Does Fast Busy Signal Mean on Cell Phone eHow

Hi there make sure sue your dial up setting as tone dial mode. Then try & let me know.

Take your cell-phone, and dial the same number, to see if you get the same "busy" signal.

If the telephones in your business require you to "dial-9" to get an "outside" line, be sure that your FAX is also following that "dial-9" protocol, and also waiting 1 or 2 seconds after the "dial-9", in order to get the dial-tone from the "outside" line.

Check in the fax setup menu and make sure that the setting for tone or pulse is set correctly for your area, most all systems now are set for tone dialing. Make sure you input the number just as you would dial it, like 1 before the area code and no area code if you are faxing a local number...

Headset says ringer off, cannot hear dial tone

Check the fax line with a regular phone and dial a fax number to listen for fax tones.

You need to dial two commands on the receptionist's phone. On the intercom dial 7311# for outside line call waiting signals and 7321# for inside calls. (0 cancels).

Carl

DO YOU HAVE DIAL TONE ON THE PHONE? IF YES, YOU MAY HAVE A BAD PHONE BOARD. MAY NEED THE HELP OF A SERVICE CENTER. BROTHER TECH

busy signal can mean another phone on your line is till connected. remove each phone one by one till the line is open, this can be also a redial on a phone activating by itself, or if you have forward messaging activated it can do this as well if it stuck on.