Unable to log in to web face config. tried every combo for user name and password. nothing works.

fixya can not help you with a name and password you need to set that up your self.go to the google page and type in..how to setup new facebook name and password.

"The default log-in credentials for de Web Config Interface are "admin" for the username and the password you create the first time around. As with all routers, you can always restore it to default factory settings via the recessed reset button on its back."

mirza ji, your internet connection must be not working. or the only other reason i would see why it is not working would be your user name and password. are you sure you are using the correct user name and password ? if not you can click on the forgot password link and reset the password. and try logging in again. also are you sure you are using the right address ? https://login.yahoo.com/config/login_verify2?&.src=ym&.intl=us

print off config page for the ip adress
log on to copier via the ip adress through ur web browser
user name is admin no password
go to address book then delete

Try this:
To access the Zoom Configuration Manager (web-based configuration utility) on the Zoom DSL modem:

1. Close any open programs including antivirus and pop-up blockers.
2. Open a web browser, and in its address bar, type http://10.0.0.2 (or http://192.168.0.1 for Zoom ADSL X6v users) and then press Enter (or Return).
3. In the Enter Network Password dialog box, type the following username and password in lowercase then click OK. (Note: The modem User Name and Password you enter here are NOT the same as the User Name and Password that your Internet service provider may have given you.)
   • User Name: admin
   • Password: zoomadsl (where "l" is a lowercase letter L)

If you are not prompted for a User Name and Password, click here for more information.

there are at times when some user accounts become unavailable due to server loads. You have to try it after a while

The password that is already filled is "user" and replacing it with "1234" will allow you to enter the setup screen.

its not actually a problem, all u have to do is to manually restart ur router and try again with the user name admin and with the password 123456 or 1234. hope it solves ur problem.

When you get to the log on screen, press the ctrl+alt+del combo twice. You should get another log on screen, change the user name to administrator, all lower case. leave the password blank and see if you can log on. Most people leave the administrator password blank...? If that gets you in, go to control panel, user accounts and change the password on your user account. Log off as administrator and log back in on your regular user name with the new password. Hope that works!

Are you connected via ethernet cable?

If not, and this is a wireless router, connect via ethernet cable and reboot the router, then reboot the computer. (You might can just try a command prompt and do ipconfig /release, then ipconfig /renew).

Otherwise, press the hidden reset button on the back of the router. You will be back at square 1, and will need to setup all of your security again, oif you had it setup.