How do I make the numbers come up to set the date. manual with camera doesn't explain. Where can I find exhaustive instructions for this model? website?

To set the date and time on your camera, follow these steps:

Turn on the camera and set the language and date/time by following the instructions in the Extended User Manual.
Once you have set the date and time, you can turn on the Date Stamp feature by following the instructions in the User Manual . The date and time will be stamped on all pictures taken with this feature enabled.
KODAK CD82 - EXTENDED GUIDE EXTENDED USER MANUAL Pdf Download ' ManualsLib

KODAK EASYSHARE CD82 USER MANUAL Pdf Download ' ManualsLib

Setting the Date:

1. Enter the program mode by sliding the Control Switch to the "PRG" position.
2. Type [the 6-digit number] representing the current date. Use the format MMDDYY to enter the date. NOTE: Single. digit numbers for months and days must be preceded by a zero [0].
3. Press the [#/NS] key to store the date.

Setting The Date And Time - Royal 210DX Instruction Manual ...

www.manualslib.com > ... > 210DX > Instruction manual

They're all described in the manual. If you don't have a manual, you may download one here.
While the manual explains what each button does, it doesn't do much to explain why you might want to do these things. There should be a number of introductory photography books available at your local library which will explain the basic concepts behind camera controls.

It seems to me, after reading the Operating Instructions, that it's not possible to stamp the photos automatically while taking them (EXCEPT for when stamping TRAVEL DATES - see below).
What you can do is enter the Play mode, the stamp the photos manually- 1 to 50 photos at a time.
To do this, kindly look on pages 66-67 for detailed instructions (with illustrating images).

Be sure to set the correct time and date prior to stamping the photos. Look on page 16 for further instructions.

If you're taking pictures during traveling, you can set TRAVEL DATE, which will also have a reference to the day number of your travel (page 48).

Hope you'll find my information useful...
Good luck,
Pelu.

Manual can be downloaded free from here ....

http://safemanuals.com/annexe_POWERSHOT%2020A550%2020CAMERA%2020USER%2020GUIDE%2020ADVANCED%2020_CANON_POWERSHOT%20A550-_E.htm

Basically the date stamp can be turned on / off as an option on the RECORD menu. Page 33 of the manual explains it (with pictures).

Note that if the option is turned on, it states that the date / time is permanently embedded in the picture.

Hope this helps

The date and time settings are found in the setup menu.

In the Camera Settings there is an option to Enable/Disable the date stamp. Look for that option and enable it to get the date on your clicked pics. In the settings only you will find the clock settting / date/time settings to adjust the date and time. Refer your manual.

Hi there.
You will find time and date in the settings menu on the camera.

Good luck and thanks for using FixYa!!

http://www.camera-instruction-manuals.com/?gclid=CJn__tjxwZYCFQO11Aod2jAjxQ

try this link and put your camera model in and then download the manual. It should tell you how to set your time and date