My Mother collected Avon in the 70's. she has passed away and left approx 800 boxed cars and other "decorative" pieces. i wish to sell them. do you have any suggestions?

Contact Avon on the customer service line at: 800-367-2866

Just simply go to www.avon.com and from there you should go all the way down, click on find a representative.

Your link works! It's not an actual email, it's a website.

uhmmm fog should go away as you advance.... maybe you could edit some inis or use some savefiles to advance, anyway I wish I could help you more but I'm stuck right now... can you pass the fireird? without using artifacts?

- Door trim.
Removal
- Unclip decorative panel -2-.
- Remove decorative panel -2- toward front.
- Remove bolts -3- (3x) from door trim -1-.
For vehicles with electric window regulators
- Window regulator switch, removing and installing Page 70-25 .
For vehicles with manual window crank
- Manual window crank, removing and installing Page 70-26 .
For all vehicles
- Unclip door trim -1-. Replace damaged clips Fig. 3
- Raise door trim -1- upward approx. 20 cm. out from door shell.
- Disengage Bowden cable for interior door mechanism Fig. 1 .
- Disconnect electrical harness connectors Fig. 2

Avon sells lipsticks, fragrances, bath and body care, hair care, Wellness products, personal care products for men and anti-aging skincare.

OKAY GET A PIECE OF PAPER I WILL GIVE YOU 2 ROWS OF NUMBERS TO WRITE DOWN. THAT WOULD BE YOUR TORQUE SEQUENCE. OKAY FROM LEFT TO RIGHT WRITE NUMBERS. 11 7 3 2 6 10 14 OK WITH THESE NUMBERS PLACE THEM UNDER FIRST SET OF 7 NUMBERS I GAVE YOU. FROM LEFT TO RIGHT. WRITE NUMBERS 13 9 5 1 4 8 12. NOW THIS IS HEAD BOLTS TORQUE YOU HAVE 3 HEAD BOLTS PASS FIRST PAST TORQUE BOLTS ALL TO 50 - 55 FT LBS FOR SECOND PASS TORQUE ALL BOLTS 60 - 65 THIRD PASS TORQUE ALL BOLTS TO 70 - 85 FT LBS.