Unplug it, then when you plug it back in it is on the default screen for set time, turn dial to right for hours will advance up starts at 00, advanced to 01, 02, and same for min. when you are at say 9 press / push in main knob 1x to advance to minutes, and advances to next input so hours, minutes, then am pm pushing button after dialing to am or pm finishes and sets the time. Jeffrey Weber-Reek
According to the manual this is how to set clock.
To set the clock, press "Clock" once or "Timer/Clock" twice (depending on your keypad).
The colon symbol (:) will flash.
Enter time of day. The time appears in the window; the colon continues to flash.
Press "Clock" or "Timer/Clock" again - colon stops flashing; time of day is set.
If you need the manual it is on link below.
http://service.us.panasonic.com/OPERMANPDF/NNH624-SET%20UP.PDF
Good Luck
368 views
Usually answered in minutes!
×