How do I change the code for EM 227 Bluetooth to an iPhone.

http://www.manual-hub.com/manuals/emerson-em-227-pdf-manual.html

http://southerntelecom.com/emersonsupport/downloads/EM227.pdf


This includes all the instructions, I hope it helps !! RDPONY

Your headset is a monaural device, and, as such, bears bluetooth profiles HSP (HeadSet Profile) and HFP (HandsFree Profile) only, which are suitable for handling phone calls. The iPod Touch is not a phone, though, for what it must lack those profiles. It does have A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile), though, which are meant for stereo music streams. In order to have a bluetooth headset paired with your iPod, you better purchase a stereo pair out there. There are lots of brands and models available.
You know, for some platforms there are some applications which are able to route all audio sources to a monaural bluetooth headset. I don't know if there are any of such softwares in Apple's app market. You could search for it, if you want, but be warned that such arrangements use to result in pretty poor sound quality.
Please, let me know if I can help you any further.
Regards, Carlos

Pairing the Headset with a Sony Playstation3 Entertainment System:

To pair your [EM-227] Bluetooth Headset with the Sony Playstation3 (PS3), go to the PS3 main menu, scroll to "Settings" and select.

Scroll to "Accessory Settings" and select.

Scroll to "Manage Bluetooth Devices" and select.

The menu will ask: "The Bluetooth device has not been registered. Do you want to register it?"

Select YES.

Put your [EM-227] Bluetooth Headset into discover mode (see X.XX of this manual for instructions on how to get the headset into discover mode).

Select "Start Scanning" from the PS3 menu.

Once the PS3 has discovered the [EM-227] Headset the screen will read "Select the Bluetooth device to register".

Select [EM-227].

The PS3 will ask for a passkey. Enter [0000] then press "OK".

Now press O (the PS3 circle button) to get back to the previous menu.

Scroll to "Audio Device Settings".

Change the "Input Device" to [EM-227].

Note: "Input Device" is the microphone, how others will hear you speak.

By default, the "Output Device" will now switch to [EM-227].

Note: "Output Device" is the audio, how you will hear the PS3 audio and others speaking.

If you would like to hear the PS3 audio and others speaking through your TV or Audio System, scroll to "Output Device" and switch to "System Default Device". If you would like to hear sound through the [EM-227] headset, then leave the "Output Device" setting on [EM-227].

To test your connection, speak into the headset and you will see the bars above the "Microphone Level" moving. If not, repeat the pairing process.

Press "OK" to confirm the new settings. You are now ready to use the [EM-227] Bluetooth Headset with your PS3 Entertainment System.

For further assistance with Bluetooth settings on your PS3 please refer to your PS3 instruction manual.

Put the headset into pairing mode. First turn it off. Turn it on and hold the powerbutton down until the bluelight is not blinking then pair using 0000 as the pin.

Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF, then hold the power button until it goes into pairing mode as discribed above. Then you can discover it with your phone. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999

Some headsets have a built in code not all are 0000 check your documentaion for both the phone and headset

You cant due to firmware restrictions Iphone has a lot of em

Try 0000, it worked for mine.

Try 0000, it worked for mine.