You may download a copy of the manual here.
SOURCE: Can I use handsets from another DCT 748 unit to expand my DCT 748
Short answer:
No. This model of phone can only support 4 handsets. If you need more than that, you will need to have a second base unit.
Detailed answer:
One of my handsets went bad, and I just bought complete DCT748-4 package from a seller on eBay for a very good price. This set was used, but in very good condition. I didn't need the whole set - just one handset - but like I said, it was a good price. Anyway, I began by telling my old base unit to de-register handset #2 (the failed unit). However, I then found that I could not register the "new" handset with my old base unit because it was already registered to the "new" base unit. So, I first had to apply power to the "new" base unit and de-register the handsets. Then, I placed one of the "new" handsets onto my old base unit, and it said "Handset Registering ..." and registered just fine. Just for the fun of it, I placed one of the other spare handsets into my old base unit. It said "Hanset Registering ..." but then it beeped and said "Registration Failed." This is because I already had 4 handsets registered to my base, and the base can not handle a fifth handset.
SOURCE: I cannot download the free manual
You can find your manual at
http://www.uniden.com/index/manuals_results.cfm?cat=59
Please rate this solution. Thanks.
SOURCE: dect 1580 how do you turn off the new message
Hello,
Usually when you listen to all your messages (no new ones) the blinking stops automatically.
Hope it helps.
254 views
Usually answered in minutes!
×