HP Photosmart C6180 All-In-One InkJet Printer Logo

Related Topics:

R
Rocio Flores Posted on Dec 16, 2015

Error 0xc05d1281 keeps appearing, I can't print, scan nor copy

5 Related Answers

Anonymous

  • 132 Answers
  • Posted on Nov 01, 2007

SOURCE: HP 3310 All In One Error

Try to reset the system by holding down the OK, Cancel, Black, and Color buttons at the same time and turn the 3310 off. Keep holding the buttons down until the printer shuts off and then turns itself back on. You will have to turn the printer off twice and then it will recalibrate. Make sure you have new cartridges in the printer so that it can reset. 

Ad

Anonymous

  • 317 Answers
  • Posted on Feb 23, 2008

SOURCE: error code: 0xd0620230

Make sure that you have the latest firmware, hardware and drive updates downloaded and installed from HP. Next, try uninstalling the printer ans the software that came with it. THen reinstall everything according to the manual.

Anonymous

  • 2120 Answers
  • Posted on Jan 28, 2009

SOURCE: can't print, copy, fax, or scan

Uneconomical to get repaired. Sorry

Buddy Mcsparrin

  • 1684 Answers
  • Posted on Jan 03, 2010

SOURCE: display says error 0xc05d1281

Hello,

The "Ink System Failure" error is causes by air in the ink feed tubes. We have a step by step guide purging the air from the feed tubes posted on our web site. Go to our site at: www.ccl-la.com , click on the printer repair link and then the HP link. Follow the steps and you should be back printing in no time at all.

I hope this helps, If so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

Anonymous

  • 89 Answers
  • Posted on Jan 28, 2010

SOURCE: Cannot print, scan or copy. Continue to receive

Hi,
Solution

  1. Remove and then reinsert the cartridge indicated in the error message.
  2. If the error is still displayed, clean the contacts. Click here to see how.
  3. If the error message is Error. Remove and Check Black or Photo Cartridge , the following steps may help:
    1. Remove both cartridges, lower the latches, and close the printer access door.
    2. Turn off the unit by pressing the On button on the front panel. Wait for the printer to completely shut down.
    3. Turn the printer back on by pressing the On button.
    4. When the message display reads Insert Print Cartridges , open the access door and replace the cartridges.
  4. If neither of the steps above fixed the problem, either the cartridge or the printer is faulty.5. Replace Cartridge.Please rate my response!!!Thanks,SF

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i fix Epson Scanner Error code w-11?

Steps to troubleshoot Epson Printer error code W-11
Step 1: Replace the printer cartridge
The very first step is to replace the cartridge. If you see that this error code remains as usual even after a replacement has been properly placed inside the printer then, the most probably it signifies that the cartridge was inaccurately installed. To replace the cartridge, perform the following instructions:
§The very first thing is that the Epson printer and its software will let users know when an ink cartridge is in low or expended state.
§If it is found that the ink cartridge is expended then, an automatic message will appear on the printer's LCD screen asking users to replace
§It will further perform a proper printing process, copying as well as the scanning in a smooth way.
§Make sure that you have kept the ink cartridges out of the reach of children.
§Keep a note that you won't be able to copy, scan or print whenever an ink cartridge is expended even if the other cartridges are not expended. So, it is recommended for users to replace the expended cartridges before copying, scanning, or printing process.
§Keep a track when you are working with Windows system to check whether black ink is low or there is more color ink than black ink. A user will get an error message when to print from their computer device.
§The next thing what a user needs to do is simply to save black ink by using a mixture of colors. This message will only appear if a user has selected the "Plain Paper/Bright White Paper" optionas the paper type and the "Text' as the Quality Option setting.
If you need any further help kindly visit us: Epson printer error code w 11
Toll-Free No: +1-888-633-7151
1helpful
1answer

How do I fix a printing problem where the error message load tray 1 keeps appearing?

You Really need to have this Machine Cleaned. there is too Much Paper dust On the sensor
0helpful
1answer
0helpful
2answers

Bizhub C652 has horizontal lines.

Print quality is good, b&w copy is good. When i make a color copy the machine makes blue lines or bink lines. This is a brand new c452.Scan to PC is ok, print its ok only copy. Lines are vertical.ea2265a7-6bf2-4ab0-abb0-94d103145c4c.jpeg
1helpful
1answer

HPPhotosmart 3210 AIO hangs us with error code of 0xc05d1281

Hi Minnie,

This could be because of residue on the Printhead electrical contacts


Try the steps below and it should help.

Turn off the Printer.

1. Open the Carriage access door.
2. Remove the Cartridges
4. Move the carriage from left to right 6 times and it should move freely
5. Clean the contacts on the Cartridge with lint free cloth. ( Golden dots )
6. Turn on the printer and it should say " Cartridge missing or need to be reinstalled "
7. Install the Cartridges and close the Carriage door
8. the printer should go through alignment process

If this step does not fix, You may try calling HP customer support to check for better options/solutions

HP Customer Care : 1-800-474-6836

Regards,
Sean
2helpful
1answer

LSU Error keeps showing

LSU stands for Laser Scanner Unit. Depending on the model this should come up only if the services used required scanning such as copy, fax sending, scanning.
nevertheless if this is a continuous message you might need to check the connectors within the scanner which I advise an field call.
1helpful
1answer

Display says error 0xc05d1281

Hello,

The "Ink System Failure" error is causes by air in the ink feed tubes. We have a step by step guide purging the air from the feed tubes posted on our web site. Go to our site at: www.ccl-la.com , click on the printer repair link and then the HP link. Follow the steps and you should be back printing in no time at all.

I hope this helps, If so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com
0helpful
2answers

Will not scan, copy or print error code e7-11

Replace the Mother Pwb the part number is CPWBN1460DS51..... Good Luck
16helpful
2answers

Ink System Failure with error code: 0xc05d1281 BEWARE SPAMMERS AT v1-800-532-4187

I had the same problem and took Guru NinaE advice....1. Unplug power cord from back of printer while it is on. 2. Wait for 60 seconds after it is in sleep mode. 3. Press and hold "Print Photos" and "Red Eye Removal" at the same time and while holding the two buttons down, plug in the power cord into the back of the printer. 4. The printer display should go blank or Reset might show up on the display. When this happens, touch the ON button and the printer will reset itself.
Not finding what you are looking for?

256 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...