It saying no signal and ive done everything please help

I would turn it off manually & reboot, it will say update failed & will try again or do a manual update & choose to just update 1 item at a time.

simply follow hp driver installation wizard guide steps ,

hope help
Mohamed Hejazi

Fix Kodak ESP Office 2170 gives a paper jam signal

How are you connecting the movie? Through a DVD player or what? Also what type of cable are you connecting the player to the tv with?
Have you tried changing cables, dvd players, and/or inputs to the tv?
I would appreciate it if you answer these questions so I can further help you figure out what is wrong.
Benjamin

if you constantly change between one type of unit to another. say between your ps3 and another type of device then you could have worn the connector on the hdmi socket. it may need to be replaced. thats the best I can do. we have a bravia but dont change connections at all because it can cause many issues over extend use especially if youre changing devices whilst the set is on, as this can interfere and damage the internal circutry which may have shorted out the hdmi circuits.

problem may not be the monitor, could be the PC video card or motherboard video circuit.

reinstall the ipod operating system.connect to itunes...format and reinstall.
or manually delete all files and folders in the ipod and then connect to ituens and reinstall new OS.
this is sure to work.happened to me too a couple of times.Oughta work.
and in case i helped u in nay way to solve ur problem...please leave me a FIXYA RATING.
Thank you.Glad to help you.

take it back

You need to change the resolution output on your PS3 to match the capabilities of your TV. If your TV is not HD you can't leave the PS3's video output on HD. SCART is for european television connections. Have you tried using component cables? Have you tried changing your tv's source to Video 1 or Component 1 or HDMI or anything that might work? Good luck!!