How do I fix a Viking oven from running too cool?

Hi,

Please click on the below link.You will get some ideas to replace it.Everything is explained with the pics.

http://www.explorerforum.com/forums/showthread.php?t=217691

[PDF]Viking Use & Care Manual

www.vikingrange.com/MEDIA.../m1300016_f20366.pdf

Viking Rangecontact our consumer support center at 1-888-VIKING1. We appreciate your choosing a... Error Handling .... *Note: Professional Series Premiere model control panel and features are shown. Oven ... upper or lower oven, and then set the desired temperature. .... cooled, remove any ash from oven surfaces with a damp.

Sounds like you need a new oven thermostat or get an oven thermometer and by experimentation draw up a new heating range for the oven dial.

Most likely a faulty oven sensor or thermostat

Hi.

If the temperature runaways 50 or 100 degrees over the set temperature, then you probably have a defective temperature sensor. Replace the temperature probe located inside the oven cavity, that should fix the problem. If it does not, then the electronic control is defective, but that is not commonly causing this conditions.


Regards.

It sounds like a weak igniter.

Temp probe/thermometer inside oven dirty, or off attachment, or defective. On some models, a small screw head adjustment is provided to calibrate thermometer under dial knob. Else, I would just set dial 50 degrees higher rather than expense of new thermometer or dial.

Page 6 of the owner's manual:
Adjust the temperature calibration.

Check the temperature select knob. On the inside of the knob there should be an adjuster.

The temperature probe may be the faulty component since this is an integrated machine.