Question about Armitron Watches

2 Answers

How do I turn off the alarm on Armitron 45/7042?

I have followed instructions. I get into the alarm mode but then when I press "C" button, it just changes the time for the alarm. I then press "A" reset and it changes from hour to minutes. The alarm keeps beeping at me. I don't want the alarm on. Help.

Posted by Anonymous on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hold A, and B and press C, mine shut off

Posted on Sep 06, 2016

  • 1 more comment 
  • prbloomq
    prbloomq Dec 20, 2016

    Thank you. nobody made a youtube for this specific watch

  • Anonymous Dec 29, 2017

    This answer assumes everyone knows which buttons are A, B, and C, which isn't helpful if you don't have the instructions anymore.

  • SHERRY JANSEN Sep 03, 2018

    Mine didn't even come with instructions

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Press and hold the button on the top left corner. The display will change to showing what the last scheduled alarm was/is. While holding this button, press the bottom on the bottom left corner. If all of the days of the week appear at the top of the display, the hourly chime is on. If no days of the week appear, the hourly chime is off.

Posted on Oct 12, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 5 Answers

SOURCE: Armitron WR165 watch - changing time

When you're in the regular time mode press "set". The secons should blink. Pressing "mode" brings you to the hour spot (hour should blink). Press "adj" to change the hour. To set the min., press "mode" again and the min. spot should blink press "adj" to change. Keep pressing "mode" then "adj" until all necessary time components are set correctly. Press "set" to get to regular time mode.

Posted on Sep 07, 2008

escapement

Arturs Kalnins

  • 2338 Answers

SOURCE: I have a Ladies Armitron All Sport watch Model

Follow this link and find instructions for your watch:

http://www.armitron.com/watch_instructions.asp

Do not forget to rate, please.

Posted on Mar 09, 2009

David Tolond

  • 2501 Answers

SOURCE: I have an Armitron 40/8125 watch. I try to set the

You need to press button A to enter the time setting mode and then press C.

If you have lost your instructions, you can get instructions from the Amitron web site.

Copy "www.armitron.com/watch_instructions.asp" into your search engine and you will see a list of illustrations of watches and associated
instructions.

Choose the one that looks like yours and download the PDF file.

Posted on Mar 18, 2010

gemineye61

Janelle Schoonover

  • 841 Answers

SOURCE: setting the time... I press

Sportline has a very complete website that should be able to assist you more direct. A little more complicated watch then I am able to assist you with. Best regards.

http://www.sportline.com/faq.php

Posted on Aug 17, 2010

jennvill19

  • 4 Answers

SOURCE: 5034 G-1000 Cannot set Date/Time

gibb erish....the same problem that already happened it on me..but there is a solution for that.just focus..let your excitement blow up if u done it will..
a manual has shown a combination of bottons to press..there is a diagram showing the combination to press so that it will beep. just try.. sometimes i press D go back to A and try long press tell it beeps and so on just follow the manual.. while the hands are still on movement just wait to stop before you press some bottons..be patient our watch is awesome..

Posted on Aug 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get the time set correctly! When i follow instructions it just seems to set the alarm! How do i do it?


Hi jeffrey_lafi,

You can easily change the time and date of your Armitron watch by following the steps below.

1. Press the MODE button once. This will put you in the timer.

2. Press and hold down the MODE button. This will put you in the alarm set display.

3. Press the MODE button once more and it will put you in the time set display.

4. Use the ST/SP button to change the blinking portion of the time. Then use RESET button to move you thru the different parts of the time/date.

Hope it helps.

Thank you for using FixYa.

Jul 08, 2010 | Armitron 40/8125BLK Digital Sport Watch

2 Answers

NEED THE INSTRUCTIONS FOR AN AQUALITE 100 jstreiter@comcast.net


To set time:

1) Press "Mode" button until Time is displayed.
2) Press and hold "Lap/RST" button until seconds display starts flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from seconds>minutes>hours>date>month>day of the week>time format>date format
5) Press "Lap/RST" once you are done to set the time.

To set Alarm time:

1) Press "Mode" button until ALM is displayed.
2) Press and hold "Lap/RST" button until minutes display starts flashing.
3) Press "ST./STOP" button to change selected entry.
4) Press "Mode" button to change from minutes>hours (remember to cycle through for AM or PM
5) Press "Lap/RST" once you are done to set the alarm.

To toggle alarm sounds on and off:

1) Press "Mode" button until ALM is displayed
2) Press "ST./STOP" button to toggle alarm sounds on or off (shown on display)
3) If alarm sound is shown on display, alarm will go off every day at the selected time. To turn off alarm once the alarm sounds, simply press "ST./STOP" button on the watch.

Mar 26, 2010 | Bulova Watch

2 Answers

I need to find someplace to download the instructions, since mine didn't come with any


I just bought a Sportline 241 last week. The instructions are as follows. Note that there are no instructions for setting the 12/24 hour time option. Mine is in 24 hour mode (which is what I wanted), but I do not recall if it arrived that way or if I stumbled onto this mode when setting the time/date or alarm functions.

I hope this helps.


SPORTLINE 241 WALKING ADVANTAGE KEYCHAIN STOPWATCH

FEATURES:
24 hour stopwatch
Time-of-day and calendar
Alarm clock
12/24 hour time option

BATTERY:
Replace with LR41 battery

TO SET TIME AND CALENDAR:
From normal time display, press MODE button three times to enter Set Time/Date Mode. Seconds is automatically selected.
Press SPLIT/RESET button to cycle through minutes, hours, day, month, day of week, seconds.
Press START/STOP SET button to change digits on any of the above (seconds only: resets to 00).
Press and hold START/STOP SET button to advance digits rapidly.
Press MODE button once to return to normal time display.
From normal time display, press and hold START/STOP SET button to see the month, day, and day-of-week.

TO SET ALARM:
From normal time display, press MODE button twice to enter Set Alarm Mode. Hours is automatically selected.
Press SPLIT/RESET button to cycle through minutes and hours.
Press START/STOP SET button to change digits.
Press and hold START/STOP SET button to advance digits rapidly.
Press MODE button to return to normal time display.
From normal time display, press and hold SPLIT/RESET button to see the alarm time setting.

TO ARM/DISARM ALARM SOUND:
From normal time display, press and hold SPLIT/RESET button, then repeatedly press START/STOP SET button to arm/disarm alarm sound.
Alarm will sound when indicator shows in upper right corner.
Release SPLIT/RESET button to return to normal time display.

TO ARM/DISARM HOURLY CHIME SOUND:
From normal time display, press and hold SPLIT/RESET button, then repeatedly press MODE button to arm/disarm hourly chime sound.
Chime will sound when dashes appear along top of display.
Release SPLIT/RESET button to return to normal time display.


STOPWATCH OPERATION - GENERAL:
From normal time display, press MODE button once to reach stopwatch timer display.
After use of any stopwatch feature, press MODE button once to return to normal time display.

START-STOP (TIME-IN/TIME-OUT) TIMING:
With stopwatch timer on display, repeatedly press START/STOP SET button to start or stop the timer. When timer is stopped, press SPLIT/RESET button to reset timer to 0.

SPLIT TIMING:
With stopwatch timer on display, start the timer with START/STOP SET button. Repeatedly press SPLIT/RESET button to split or release the timer. Press START/STOP SET button to stop the timer. Press SPLIT/RESET button to reset timer to 0.

1-2 FAST FINISH:
With stopwatch timer on display, start the timer with START/STOP SET button.
Press SPLIT/RESET button for STOP #1.
Press START/STOP SET button for STOP #2. The stop time for #1 will now be shown.
Press SPLIT/RESET button. The stop time for #2 will now be shown.
Press SPLIT/RESET button to reset the timer to 0.

Apr 17, 2009 | Watches

2 Answers

GapKids Watch turning off the alarm


If you don't have the instructions, the buttons are labeled as follows:

Top Left is "Light" - Button A
Bottom Left is "Mode" - Button B
Top Right is "Start" - Button C
Bottom Right is "Reset" - Button D

With the time displayed, press the reset ("D button as listed in the instructions) and the alarm time should be displayed. While holding the "D"/reset button down, press the start or "C" button to toggle the alarm on or off.

Hope this helps

Dec 19, 2008 | Nike Triax Fly WK0006 009 Watch

10 Answers

How do I adjust date of my watch bought from GAP


Here is the manual from GAP customer service.

Dear gap.com Customer,
Thank you for your email regarding the Sporty Printed Watch user
instructions. Please accept our apologies that no directions were
received with your order.
The instructions are as follows:
Button Functions:
A. Light
B. Mode
C. Start
D. Reset
Standard Time Adjustment:
1. To set the time, press the Mode button three times (The seconds and
the word Tuesday should start flashing).
2. If the seconds position shows less than 30 seconds, pressing the
Start button will reset the seconds to 00. If the seconds position shows
more than 30 seconds, pressing the Start button will reset the seconds
to 00 and the minutes will increase by 1.
3. Press the Reset button until the area you want to change starts
flashing (i.e., second, minute, hour, day, month, and weekend. Press
Start button once for per unit increment, press and hold for 3 seconds
for speedy advance.
4. At completion, press Mode button to resume standard time display.
To reset the Alarm:
Press the B: Mode button until you reach the alarm.
Press the D: Restart button.
Press the C: Restart button to get back to the time

Sep 29, 2008 | Tag Heuer 2000 Aquaracer WAB2011.BA0803...

1 Answer

How do i set the time on 1440 T5K085


The instructions that came with my watch didn't work but after playing around with the buttons for a while i final came up with this: Press the mode button for 2 secs. The first display is the alarm. Press mode again and the time shows with the seconds flashing. Use the set button to change seconds, minutes, hours. Use the start/stop button to change from seconds to minutes to hours.This will then take you to change the month, date and day of the week. Mode takes you back to the start (time display). The alarm is changed in the same way.
To change from 12h clock to 24h clock keep the set button pressed (the alarm time is displayed) and press mode, the 'A' will disappear when in 24h mode
When the time is displayed press the start/stop button to show the date.
Not sure how to use the countdown timer or how to stop the alarm yet though!

Aug 13, 2008 | Timex Watches

2 Answers

Setting watch


Press and hold the top left button (mode) until the numbers start blinking. On mine this is the alarm time set. Press the mode button one more time to get to time set. The hour will be blinking. Press top right button (start/stop) to cycle through hour, minute, date, etc. and press bottom right button (adjust) to change the number which is flashing. Press mode to finish.

To turn off alarm, press and HOLD Adjust button, then press Start/Stop to cycle through alarms on/off.

Mar 25, 2008 | Timex 1440 Nylon watch

10 Answers

Acqua Indiglo Digital Watch


My watch has 4 buttons (2 on the left, 2 on the right) plus the "Indiglo" button. Use the "Mode" button (lower left) to move between the time and the stopwatch. When seeing the stopwatch, hold the "Mode" button. This will get you to the alarm setting mode. Press the "Mode" button again to switch to the time setting mode. Use the "Start/Stop" button (upper right) to move from seconds > minutes > hour > date > day of week. Use the "Spl/Reset" button (lower right) to change the numbers.

-AP

Dec 04, 2007 | Watches

3 Answers

Setting a generic one-button digital watch


I too lost the instructions for my generic 4 button digital watch and had to find the functions by trial and error and the results are below.

=========================

beb6348.gif
Adjust Alarm/Time/Date - Press and hold Mode Button. When alarm displays, release. Start-Stop Button SELECTS, Lap-Reset Button ADJUSTS selection. Pressing the Mode Button again changes from Alarm to Time/Date, ADJUST as above. Pressing it again exits.

Select/Deselect Alarm, Hourly Chime or Both - Press and hold Lap-Reset Button, Start-Stop Button TOGGLES through the above options.

Select 12/24 Hour Mode - Press and hold Lap-Reset Button, Mode Button TOGGLES through the above options.

Select Stopwatch - Momentarily press the Mode Button, use the Start-Stop and Lap-Reset buttons to control.

Display Date - Press Start-Stop Button in normal time
display mode.


Display Alarm - Press and hold Lap-Reset Button in
normal time display mode.


Cancel Alarm - Press Lap-Reset Button in normal time
display mode to silence alarm.


Hope this is helpful,
George.

Nov 06, 2007 | Watches

5 Answers

How to set watch


I just set the time on mine with these instructions 1) With the watch in the regular time display mode (doesn't matter if 12 hour or military time), depress and hold the lower left hand button (mode button). After a few seconds the watch appears to shift to alarm mode and it is blinking. This puts you into the mode for adjusting the alarm.

2) If you want to adjust time, date, etc rather than alarm time, after you have done step one, simply press that same lower left button again, and then it will put you into the time mode, but this time the time mode is blinking and you can adjust the various components (seconds, minutes, hours) then you can use the upper right hand button to navigate thru seconds, minutes and hours. Then you can change the time with the lower right hand button you can only change the time forward. I hope this helps !!!

Apr 02, 2007 | Kenneth Cole RK5034 REACTION

Not finding what you are looking for?
Watches Logo

Related Topics:

5,194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Armitron Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Armitron Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...