There was an independent film on youtube in or around 2006-07 and it was about this teen who bought a wooden cross off of E bay,and anybody who owned it died,Please HELP!

Consider the irony of your situation: from my own experience with teen fiction, I remember that many of the characters' lives seemed average, bland, and simple until someone else came along. I wouldn't focus on trying to find your ideal existence, rather look at yourself as one of those characters on the brink of something extraordinary. Try identifying with the characters' lives in ways that are similar to your own, but don't try to perfect your own story when every story line has its obstacles.

Email this email and ask for help
[email protected]
you may be able to purchase the screws from here worth a try

that's a generic question each brand has its own code to unlock the unit . so more information is required to assist you
model number and brand would be the first place to start

I had the same problem on my hd52w59 hdtv and sucessfully fixed it yesterday from an answer i found here...so hopefully im paying it forward.

First off, im no TV tech so you do this at your own risk!!! Based on the research ive done regarding this subject, if there is no issue with the picture and its not related to speakers(ie. if you mute it and it still makes the sound) then its the horizontal drive coil. The fix i read was to put nail polish or hot glue around the coil. Well i came up with something easier and its worked for a few days now(fingers crossed). An old fashioned wooden clothes pin. Put it on the horizontal drive coil and it absorbs the harmonic frequency(high pitch noise). I realize this is a wooden object on a electrical piece that heats up but i have had no issue as of yet.

Now, how to locate the noisy horizontal drive coil...unplug TV from power, remove the lower rear panel around where the wires go into the tv. There are about 8 #20 torx bit screws you remove, then use a flathead screwdriver to pop one clip on each side and 3 underneath, this will allow the plastic trim panel to pop off. Get a flashlight aimed in there so you can see the components. Plug the TV back in and turn it on...wait for the noise. Now make sure you dont touch anything high voltage and once again you do this at your own risk...but take a small wooden stick (i used the stick from a plunger) and touch it to the suspected culprit...when you touch the noisy drive coil the noise will immediately go away. Once you know which one it is turn the TV off, unplug it, and put a wooden clothes pin on it. Plug the TV back up, turn it on and ensure the sound doesnt come back before putting everything back together.

Beats the hell outta paying a technician $75-100 plus parts, huh?

EARTHS TRANSFORMATION INTO THE 5TH DIMENSION I WOULD LIKE TO SHARE WITH ALL THE OCCUPANTS OF MOTHER EARTH THE

REASONING BEHIND THE "DOUBLE SHADOW". MOTHER EARTH HAS BEGUN A

SERIES OF EVOLUTIONARY TRANSFORMATIONS, ONE OF WHICH IS

AFFECTING THE NORTH POLE, OR MAGNETIC POLE, THE REASON FOR THE

NOW "QUADRUPLE SHADOWS" IS THE EARTHS ROTATION SPEED. EARTH IS

PREPARING FOR A DIMENSIONAL SHIFT, FROM A 3D TO 5D. HENCE THE

REASON FOR BINOCULARS TO SHOW DOUBLE IMAGES, THEY AREN'T BROKEN,

THE "FUZZ" OR "FREQUENCY SNOW" ALL AROUND, VISIBLE TO CAMERAS,

RECORDERS ETC. THE SHADOW ENHANCEMENT AND VISUAL INTAKE OF SUCH,

ALSO SEEMS THAT BLURRY IS EVERYWHERE, IT IS NOT YOUR VISION, IT

IS THE MAGNETIC ENERGY , NOTHING SEEMS TO WANT TO FOCUS, SEEMS

AS THOUGH THERE IS A MIST OR FUZZY FILM EVERYWHERE. tHESE ARE

THE PHYSICAL SIGNS OF THE EARTHS NATURAL AND NECESSARY CHANGE.

NOW IS THE TIME FOR ALL TO FILL THE EARTH WITH LOVE, LIGHT

HAPPINESS AND INNER PEACE. I PUSH INTO ALL OF YOU , HAPPINESS,

JOY AND LOVE. lIGHT SHALL BEAM THROUGH AND AROUND ALL OF YOU

AND YOURS. POSITIVITY AND AWAKENING TO ALL WITH LOVE.

I don't know about the warranty, take it back to where you bought and find out. We make all our scrapers out of old files, cabinet shops have lots of dull files kicking around, You will need a big stationary belt sander with a disc to get the best job, make any shape scraper you need, then make you own handles, dip them in sanding sealer, put on a nice ferell,? (SP) your all set. You will be throwing the store bought set out.

try going into one router & change the channel that it is broadcasting on.

Did you ever figure out what was wrong? I am in the same situation...