Wme8227s. What does code E18 indicate? - Beko Washing Machines

go to ukwhitegoods and tap in beko error codes you will find it there

chk this link...

http://www.e18error.com/

does it drain within 90sec if not look at the pump and the two pipes to it
or check motor brushes

You can download this manual here:

http://www.beko.co.uk/manuals/wme8227.pdf

I would also contact the seller and complain that the manual was missing.
Ask them to post you a hardcopy.

The E18 error happens on Canon cameras usually when the lens is jammed when extending.
The error is so (in)famous that it has it own website where you can find help and advice on how to fix it. You can view the site by clicking the link underlined in blue below:

http://www.e18error.com/

There is also a Wikipedia entry which you may find helpful:

http://en.wikipedia.org/wiki/E18_error

Please take a moment to rate this solution & let us know if the information given was useful to you – Good Luck!
Informatica

e18 code keeps coming up

Hey there johans, the E18 error code indicates there is a problem with your lens unit or lens cover. It was probably the result of an impact of some sort, or you may have something such as sand or dirt jammed in the device. If you cant see anything to clear and clean away, try turning off the camera and restarting. If this doesn't reset it and allow it to function properly, then you will need to bring it in for service.

E18 indicates a lens or "optical unit" problem. In other words your zoom lens won't function correctly. Canon will be more than willing to look after you.

The "E18" error code indicates an error that involves the lens unit or lens cover. Or it may appear if you apply pressure to the area surrounding the lens while handling the camera. Remove and reinsert the batteries to see if the error code will reset. Generally speaking, there is nothing you can do to correct the problem other than to send the camera to the appropriate factory service center for correction of the error. Following the repair cost you should decide, whether it worth it

The "E18" error code indicates an error that involves the lens unit or lens cover and it's make sense that the reason for it is sand. Try to clean lens area using air pressure. In case it will not help, you should send the camera to the appropriate factory service center for correction of the error. Following the repair cost you should decide, whether it worth it