Panasonic Viera TH-42PX80U Plasma TV Logo

Related Topics:

Birdy Baroni
Birdy Baroni Posted on Oct 24, 2015
Be the first to answer

Why is there a red light that indicates LAMP?

I replaced lamp 6 months ago, never could reset it. Now there is a solid red light that says lamp. What does that mean?

Answer This Question

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 12, 2008

SOURCE: Red power button & "lamp" indicator blinks

Having similar issue with my PT-44LCX65. Lamp blew and replaced it (last month), never figured out how to reset timer. Now red indicator light blinks once every 5 seconds and after about 4 minutes TV goes black.... Any ideas?

Ad

Anonymous

  • 59 Answers
  • Posted on Feb 05, 2008

SOURCE: PT-60LC13

there are fans inside tv need to make sure they are clean and free of dust

Anonymous

  • 1 Answer
  • Posted on Aug 06, 2008

SOURCE: Power indicator light blinks orange times

sounds like the lamp faceplate is not screwed back in properly

Anonymous

  • 1 Answer
  • Posted on Oct 02, 2008

SOURCE: projection lamp timer reset

I need help resetting the lamp timer. Is there a way to reset the timer w/o the remote? We bought this tv as a floor model 4 yrs ago and they didn't have the actual remote that came with it, so they gave us another remote that works. We replaced the lamp but we keep getting the message that the lamp needs to be replaced and the timer reset. Plus the red lamp indicator is still on. We even used a friend's remote (he has the exact same tv) and it still will not reset the timer.

Anonymous

  • 326 Answers
  • Posted on Jan 31, 2009

SOURCE: Lamp indicator flashes red 3 times every 5 secs.

Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit, check T603 and R672.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Tv won't power on anymore. i get a solid red light. why?
Solid red light means the lamp has failed. Try replacing the lamp first. Mitsubishi DLP TV Bulbs

These folks have the proper lamp you need and have a 6 month warranty
Read full answer
Sep 16, 2015 • Mitsubishi WD-60735 60" DLP HDTV
0helpful
1answer

I have a Mitsubishi WD-73727 dlp TV, picture went out and lamp indicator started flashing red then orange. i replaced the lamp but the problem persits, any help?
Lamp light blinking yellow means lamp door not installed.
Lamp light solid red and TV shut off is lamp error (did not light.)
Read full answer
Apr 20, 2014 • Hitachi 42V710 42" Rear Projection HDTV
2helpful
1answer

I replaced the projector lamp and still no light what am i missing. all i get is a solid red lamp indicator and a orange power indicator.
hi,
Did you reset the lamp hour after replacing the lamp. If not do the following for the same and try again. Also check is the lamp inserted is correct or not. Also check the lamp cover is properly closed or not.

press the "Help" button on the remote control for a minimum of 10 seconds while in standby mode. When the lamp time clock is reset to zero, the LAMP indicator (red light )goes out.
ok
Read full answer
Feb 10, 2011 • NEC VT465 Multimedia Projector
0helpful
2answers

LG RU-60SZ30 when turning the tv on the power lite changes from red to flashing amber, flashes 6 to 7 times then turns back to solid red. The tv never actually starts. Before this the tv would randomly...
I have read another solution which may indicate the light engine has failed and will likely need replacing. The cost is quite expensive. $1500 range and apparently the part is no longer available from LG. Best you might do is get an estimate to repair just to be sure.
Read full answer
Dec 04, 2010 • LG RU-60SZ30 60" Rear Projection...
0helpful
1answer

We replaced the lamp about 6 months ago..but now it cuts off randomly..the red light and one green light will flash? Lamp replacement was when all 3 lights were flashing. Suggestion?
Is the picture quality good if it is then the lamp is ok try to reset the lamp timer if you haven't all ready. I think that the problem is coming from the ballast board this is the power source to the lamp, with time this part starts to ware out and starts to get weak. that is the reason your lamp does not stay on
Read full answer
Sep 07, 2010 • Samsung HL-S5686W 56" HDTV
0helpful
1answer

Hello, I have a 52525 and the lamp indicator went
push the menu and device buttons on the front of the set both in together and hold for 6 seconds and see what two digit error codes blinks. It will most likely blink a 3 pause then 4 and then repeat the sequence indicating a 34 error for lamp abnormality which is almost always caused by faile capacitors on the Power pwb.
Read full answer
Jan 22, 2010 • Mitsubishi WD-52525 52" Rear Projection...
0helpful
1answer

Lamp won't light, get solid Green light and flashing Red light
I would agree. Balast needs to be changed
Read full answer
Aug 05, 2009 • Televison & Video
0helpful
2answers

The Protectiopn circut is working
Hi there

Did you check that your lamp hours were actually reset ?
Read full answer
Mar 27, 2008 • Mitsubishi XL1XU Multimedia Projector
0helpful
2answers

Replaced lamp and now can't get a picture
Hi Sally Jo, Unit powers on and works properly for a while then shuts off with a red lamp LED (lamp error). Suspect bad lamp part # 915P020010 2. Lamp enable line at J14 pin 6 does not switch to 5 volts after turn on, 12 and 5 volt supplies are good. Suspect the Light Engine part # 939P977010 3. At power on the lamp turns on and off three times and then the unit shuts down with a red lamp LED (lamp error). Replace the Light Engine part # 939P977010 4. Check for 12-volts DC at J-9 connector pin 4 on the Engine Driver PCB, if missing check for an open F9A09 on the Power PCB, if it is open replace F9A09 part # 283P127060 and the Light Engine part # 939P977010 5. Lamp enable line at connector J14 pin 6 on the Engine Driver PCB switches to 5 volts after turn on but does not go back to 0-volts (low) after 5 seconds, 12 and 5 volt supplies are good. Suspect the Light Engine part # 939P977010 6. Check for 5-volts DC at J-9 connector pin 1 and 2 on the Engine Driver PCB if missing replace the Power PCB part # 934C148001. Hope this helps!
Read full answer
Sep 17, 2007 • Mitsubishi WD-52327 52" Rear Projection...
0helpful
1answer

Lamp problem or not?
2 years and three months but, what counts are the hours that it was on. Your software only really effects the way the TV interacts with HDMI inputs and really won't effect much else. The manufactures only expect 4-5000 hours on the lamp. Some go less some go more. You need to replace that lamp most likely.
Read full answer
Feb 26, 2007 • Mitsubishi WD-62525 62" Rear Projection...
Not finding what you are looking for?

View Most Popular

Viera TH-42PX80U Plasma TV

  • Televison & Video

Related Question

Tv won't power on anymore. i get a solid red light. why?

  • Mitsubishi WD-60735 60" DLP HDTV

210 views

Ask a Question

Usually answered in minutes!

Popular Questions

What is the screw hole size in back of tv

Panasonic Viera TH-42PZ80U Plasma TV

Panasonic tv will not turn on red light flashing 3 times what does it mean

Panasonic Viera TX-P58V10 58 in....

How can i delete a

Panasonic Viera TH-42PX80U Plasma TV

Panasonic TH-50PZ80U tv, error- 2 blinks

Panasonic Viera TH-50PZ80U Plasma TV

I locked my panasonic tv and for got the code

Panasonic Viera TH-50PX80U Plasma TV

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Panasonic Televison & Video Experts

Grubhead
Grubhead

Level 3 Expert

5755 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...