On my neon smart tab my calls are in a loud speaker how can i set to a normal sound such that my calls remain private please help me

Ifthe volume level is normal using headphones, so clean the speaker side gently with a toothbrush. At times some dust could clog the little holes.

Go to this website, make an account, go to support, help center. Thenfollow the instructions and you might get your answer.

Hope this helps. :)

click start right click on computer select properties then device manager scroll to sound and video game controllers if you see a yellow question/exclamation mark or a red X the driver will need to

click start control panel hardware and sound manage audio devices right click on your speaker select configure speakers

right click on the speaker icon in the bottom taskbar you will see an array of options select playback devices make sure it has a green tick and the correct speakers are selected

be updated if you computer came with a motherboard disk the drivers could be on it although once speakers are connected widows 7 should automatically update the drivers

click start control panel hardware and sound manage audio devices playback you might have to set a default go for via high definition audio then right click on speaker

you might have to configure them then select properties you will see tabs general level in this tab make sure your settings are loud enough also enhancements and advanced from the drop down

list in the advanced tab select dvd quality or another then apply
hope this helps you W7

Internal speaker sound volume is controlled by the rocker switch on the right side - directly below the headset jack. This will control both the private listening mode volume level and the volume of speaker when Speakerphone (or MP3 audio) is selected. The speakerphone mode is toggled on and off by pressing the "$" key (to the right of the "M" key).

Ringer volume is controlled by first selecting one of the seven customizable profiles under the speaker icon on the top left of the screen (below the battery gauge). Move the cursor to highlight the speaker icon and press the track ball. Choose the desired profile: Normal, Loud, Medium, Vibrate Only, Silent, Phone calls Only or All Alerts Off. Repeat the process - but this time scroll all the way past the profile list - and choose "Edit Profiles" instead. Here you can select the profiles one by one (or even add a new one) to customize them to your liking. You decide the sound, volume,etc for all the alerts for each profile. It provides a huge amount of customizing choices.

Finally, you can freely download the 314 page Blackberry Tour 9630 User Guide to learn about all the functions and tips using the phone.

Please rate my reply if it was helpful. Thanks and good luck!

click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or select the voice tab and make sure that you have the right media selected also select volume make sure the box for microphone has a tick in it
click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it
for windows 7
click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select enable
click start control panel on the left select hardware and sound then select manage audio devices then recording you should see a microphone right click select configure speech recognition then you will see earphones with a speaker among a list set up a microphone headset with microphone then next and next again you should see your earphones with microphone being configured
click start control panel hardware and sound manage audio devices playback you might have to set a default go for via high definition audio then right click on speaker you might have to configure them then select properties you will see tabs general level in this tab make sure your setting are loud enough also enhancements and advanced from the drop down list in the advanced tab select dvd quality or another then apply
hope this helps you

Hi either you have a loud speaker fault or your phone profile is set to silent, go into the settings then either phone settings or profiles then choose normal, then go into the settings under the normal profile and check you have ringtone chosen and the alarms and alerts are turned on if these are off then your phone wont give out any sound.

let me know how you get on or if you need further assistance ok

please rate this solution, thanks

Check your headphone output and check if the volume is the same. If the volume is good, then there's a possibility that the speakers are bad.

the normal speaker is broken

Hi,

Please do these settings and try,
Go to Start > Control Panel > Sound > Speakers/Headphones > Enhancements Tab
Now Tick the "Loudness Equalization" -> Apply / OK

Also tick the "Bass Boost and Low Frequency Protection" plus the "Virtual Sound".
This will make it better. Thanks.

- 82k  ^  0k  is normal   it is called consumer output. when you go into the + zone   that is studio grade pro audio.  so this is not your problem... i think  either you have a bad output or bad speakers...... try some other speakers,but careful !  not to blow them with loud volume  if they are not set up for this unit.  hope i could help   also try other on board sound settings when trying other speakers       imanfix