How do i get my Kenmore Elite freezer out of demo mode

if the machine has been put into 'Demo Mode' the cooling stops working. It is a special setting for when the unit is on the sales floor.... What is the model number and brand?
For Kitchen Aid the way to end DEMO is to hold the 'max cool' and 'cooling on/off' for several seconds until the control beeps...

Try pressing ultra ice and home while the refrigerator door is opened,or ultra ice and the refrigerator pad with the freezer opened. Hold for five seconds. Hope that works.

It sounds like you have one of two issues there. Maybe you need to turn it off and wait for 10 minutes for it to reset (compressor has "vapor-locked" and the freon is not able to circulate through the compressor). The other option to try is that the refrigerator has entered into "demo" mode. This is the mode that it is usually put into in stores so that the compressor is not running, but all other things work for demonstration on a showroom floor. A voltage spike might have shocked it into the demo mode and will work in all ways except for a blinking light indicating the demo mode as well as no compressor activity to cool anything... Look in your operator manual to see if they mention the demo mode and how to enter and exit it.

Hope that helps.. I have seen both of these situations though.

Ever get an answer or diagnosis? Mine is doing the same thing. Thanks.

kenmore elite, alarm kept going on and b flashed on and off. I finaly figured out on bottom of freezer there is a battery door open it and change 9v. thats it,

alarm should go off when freezer reaches minus 18c or lower.

buy the updated seal kit direct from the manufacture

That alarm is there for a reason. Grab your owner's manual and see the different things it can mean. If the gas is getting low, that could be it, and you'll want to solve it as early as you can.

Sometimes a power surge or brown out can make that alarm go off. Try unplugging it for 5 minutes.

that's the same problem i incurred, i replaced the thermostat and the fan. seems to be working fine.

might have a defrost problem check to see if it is building up with on the back panel if it is you need a defrost timer or limiter or heater or fan