GE APH10AA Air Conditioner Logo

Related Topics:

Posted on Jul 12, 2009

E4 code is showing on my GE room air conditioner APE07AHM1

The unit turns on, opens its vents but shows an error code of E4

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Jul 27, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 27, 2010
Answers
1
Questions
0
Helped
4061
Points
7

There is a water holding tank on the right lower side (when u are looking at the front), empty it and the unit comes back on.

  • Hassan Nathani Oct 21, 2016

    Is this solution for a portable aircon or the aircon on the wall?

×

Evgeni Ivanov

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Welcome Back:

Visited the website for 2 consecutive days.

  • Contributor 1 Answer
  • Posted on Mar 04, 2014
Evgeni Ivanov
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Welcome Back:

Visited the website for 2 consecutive days.

Joined: Mar 04, 2014
Answers
1
Questions
2
Helped
4061
Points
1

Code e4 on fisher conditioner

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

E4 Error oreint Dc Dc invater

E4 Error Code
The E4 display is not actually an error code, but indicates that the air conditioner has entered defrost mode. This occurs when the unit detects ice on the evaporator which located behind the front grille. Once defrosted, the air conditioner will resume normal operation.
https://www.lg.com/us/support/help-library/error-codes-room-air-conditioner-CT10000014-1432829295501

https://sialkotacrepairing.com/2020/01/20/orient-ac-error-codes/
tip

CARRIER WINDOW ELECTRONIC CONTROL

CONTROL PANEL ERROR CODE
PROBLEM
REMEDY
E4
Thermistor problem
Shutdown unit and restart
E3
Unrecoverable of E2RAM data
Shutdown and unit and restart
E2
Loss or corruption of stored data
Using remote control go to Cool mode and shutdown the system, and then restart.
E1
Code validation check fail
Shutdown and unit and restart.
FL
Filter check warning
Press the “MODE” and (DOWN) “▼” buttons together until error code disappear.
Note: If the problem persist replacement of control board is needed.

-Push arrow up and arrow down together for 5sec. the room temp. will show.


eccec90.jpg
0helpful
1answer

E04 FAULT. RESET AND RESTARTED, UNIT NOT RUNNING BUT NO FAULT ERROR ON THE CONTROLLER

E4 Error Code
The E4 display is not actually an error code, but indicates that the air conditioner has entered defrost mode. This occurs when the unit detects ice on the evaporator which located behind the front grille. Once defrosted, the air conditioner will resume normal operation.
https://www.lg.com/us/support/help-library/error-codes-room-air-conditioner-CT10000014-1432829295501

https://www.qualityac.com.au/blog/reset-air-conditioning-error-codes/
0helpful
1answer

GE APE07AHM1 Won't Run

This unit has a famous problem with the control panel. Try to use the remote to turn it on, instead of the panel. I had the same problem.
1helpful
2answers

We were getting an E4 but now we get an E2 but

I do know that the owners manual should show you what each and every code means? Some times the manufacture will paste a strip located on the panel of the indoor unit showing what each code means. If not, I would contact the factory on this. I know on Bryant, Mitsubishi splits, Day and night, (Bryants), Tranes, Lennox and most all others, do show in the manual and on the unit behind the panel. Try looking for them there.
Sincerely, shastalaker7
0helpful
1answer

System does not blow cold air, what refrigirant should be used and how to refill it ge room air conditioner model ape07ahm1

if you have a look at the outdoor unit there will be a label with the gas charge and type of gas,usually to charge the system with fresh gas you need to **** the old one out,evac. the coils and charge
10helpful
2answers

E4 error code on AUX mini-spit a/c unit

E9 Showing on my split unit a/c
3helpful
1answer

Ramsond split AC 12000

HI YOUR BROBLEM I THINK IS THE SENSOR FOR THE ROOM TEMP
6helpful
1answer

E4 Error code on APE07AHM1

I emptied the water tray. Viola!
Not finding what you are looking for?

4,071 views

Ask a Question

Usually answered in minutes!

Top GE Heating & Cooling Experts

Brad Brown

Level 3 Expert

19187 Answers

vince

Level 3 Expert

2530 Answers

Alfredo Texmenistan

Level 1 Expert

26 Answers

Are you a GE Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...