I have machine JUKI 8700 A 924.xin er error indications from edit box thanks all

The E24 error code for the Juki CP-130 sewing machine usually indicates a problem with the thread take-up lever. Some common causes of this error include a thread take-up lever that is not properly installed or adjusted, a bent or damaged thread take-up lever, or a thread take-up lever that is blocked by lint or debris. To resolve the issue, check the thread take-up lever and clean it if necessary, and make sure that it is properly installed and adjusted. If the issue persists, you may need to have the sewing machine serviced by a professional.

Question edited for correct name of the maker 'judi' to 'Juki'.
Question moved from Office Equipment.

Motor Failure.

https://www.google.com/search?q=juki+5550-6+e7+error

..

Perhaps it would be best to contact Juki Support.

Problem with Juki DDL 5550N 7 Sewing Machine Error Code E24

...

Hi Mohamed
regarding Error E 071 of SC-810 control please check :
1- thread trimmer cam correct adjusted or not.
2- there is a lot of thread into motor pulley or machine pulley.
3- if error E 071 coming immediately when turn power ON means problem inside control box, to confirm that please put working control box on machine , if error remove means problem at control box.
best regards
ASHRAF ABOZID
[email protected]
CAIRO - EGYPT

hello dear
regarding JUKI MOL-254 error ( unknown command trap* address er 010:9afc ) that's means there's a conflict inside control box at main board or problem at main EP-ROM ( software for main board ).
- just try to make refresh for machine and let me know.
best regards
ASHRAF ABOZID
[email protected]
CAIRO - EGYPT

contact juki,, here is a link,, see what they say

Juki America Dependable Quality in Home Sewing

Try the manuals here: http://www.jukihome.com/support/jukimanuals.html

HI there
can you please inform us what's model of control box? there is no error named E815 !!!! please we need more explain to help you.
thanks and best regards
ASHRAF
CAIRO - EGYPT
[email protected]

hi there
regarding Error E924 at JUKI control it means Motor driver failure ( Motor driver has broken.) or you can first check motor connection if connected secure or there's lose connection. other ways try to change motor with new one or check control box only with working machine to confirm Error coming from motor or control box.
BEST REGARDS
ASHRAF
CAIRO - EGYPT
[email protected]

hi there
there is no ERROR 13 on control box erros.please tell me correct error no. and control box model i will send to you what you can do.
[email protected]