A red light is flashing in the corner of the handset. How do i shut it off?

Go to the base station of the D1780, press Play. Alternatively, when all of the handsets are in standby, press Message/Mute (below 0 on the handset) on one of the handsets. Then wait until all new messages have been played back. The blinking light indicates new messages on your answering machine.



You can find this information in the manual on page 16. Uniden has the manuals for their phones on their support site: http://www.uniden.com/scat/dectphones_mnl . The direct link to the manual is http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/D1780om.pdf . (Note: you will need Adobe Reader or a similar program to view or print the manual.)



I hope this helps.



Cindy Wells

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

these 5 leds lights when phone is out of program. every phone should have his own indicator showing (when handset is off) his position in chain of phones. to make them stop flashing do following:

1. push and hold "PROGRAME" button until "MUTE" indicator lights (you'll hear beep sound).
2. push one "1" to "5" button on numeric keyboard depending on telephone's position in chain (must be unique).
3. push "MEMORY" button.
Now when you pickup handset only one indicator should light.

sorry, my English is not perfect :-(

how many red lights are flashing is their 4 lights all corners lit up or is it 3 red lights with 1 corner not lit up, let me know then i can assist you further

That is the message waiting indicator, it is telling you that your Call Notes (Or whatever your service provider calls it's voicemail) has a message waiting. If you do not have a message waiting, you can turn the light of by following these steps:

Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes and
appears in the handset display. In the event your message waiting light gets out of sync with your phone company’s
voice messaging system, you can manually reset it back to the “No messages waiting” state.
Press and hold FIND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
A beep sounds and the message alert tone is reset.

There is an old message stuck in memory. Hold down the OFF button on the base handset for 10 seconds.

No, that typically is used to notifiy you that you have a voicemail.
It's not an indicator of phone working.

It might be your voicemail. Check your voicemail.

Our just started to do the same thing. Drove us crazy because there were no messages. I couldn't find the manual so I looked up the manual on their website. Here's how to fix it....IT WORKS! With the phone in "stand by", open the menu and select Global Setup.Select VMWI reset. Then select yes.

This is usually a software issue on K series Sony Ericsson Handsets, try using the Sony Ericsson Update Service to Update or Re-Install the phones firmware... Its available to download from the Sony Ericsson support site if you dont already have it http://www.sonyericsson.com/cws/support/phones/k770i?lc=en&cc=gb Remember though if your phone is unlocked, the unlock for these may have been a Flash Patch unlock so you might have to get it unlocked again afterwards...