I need a serial number for the Olympus AS-2400 transcription.

check that the program is compatible with win 10 os
if not then you have a problem that you will have to microsoft or the software publishers as to how to get it to work properly
take it all to an IT geek shop and have them install the soft ware or find out why it will not work

I saw the AS2400 is compatible with Windows XP/2000/Vista.

You can install Windows XP in your computer (I presume you have a 4th Gen Intel processor installed in it) and run this software under Windows XP.
On the Windows 8.1 Help and Support, search: Windows XP

You may download a copy of the manual from here.

HI friend....
if you have a number of olympus then call them and ask for serial key...
or you can go to olympus site http://www.olympus-europa.com/consumer/2590_software.cfm

have a nice day.

ifyou find this is helpful for you so please rate me this will encourage me todomore free work..
regards





Thanksand have a nice day.

Hello first you need to have a transcription software program, there is a different transcription software and depends on the one you used, that's the pedal that you will need, or you can buy the complete kit pedal and software any of the following can work for you.

http://www.tvps.com/Products/SONY-FS-85USB-Transcription-Software-Kit---New-FS85USB__SO-FS85-USB.aspx

http://www.tvps.com/Products/Apptec-DigiScribe-Digital-Transcription-Kit---New__AP-DigiScribe.aspx

http://www.tvps.com/Products/ECS-PowerPlayer-Digital-Audio-Transcription-Software-Kit---New__ECS-PP-IN-USB-2-SP-USB.aspx

http://www.tvps.com/Products/Olympus-AS-2400-Transcription-Software-Kit---New__OL-AS-2400.aspx

http://www.tvps.com/Products/Philips-LFH-7177-SpeechExec-Transcription-Kit-7177---New__PH-LFH-7177.aspx

The player standard software that comes with your DS 2400 does not support the Olympus wav pedal (RS 27). You need the transcription version of software, the AS 2400 transcription kit (169.95) or, just the software, Player Standard T (99.95).

Cheers,

cost-plus.com

this should work:
http://www.olympusamerica.com/files/oima_cckb/AS-2400_Instructions_EN.pdf

No, you need the serial number with the T on the label.

This disk which comes with the DS-2300 and the disk which came with the AS-2300 is the same.

With my serial numbers the digits were not much different.

Make sure you are installing the Transcription version of the software not the Dictation version (Transcription version serial number starts with RTM and dictation starts with RDM). The foot pedal will not work with the dictation version of the software.

The answer is all in the serial number you use to install the DSS player!

Look carefully and you will see the recorder disk has in my case an [E] printed above the install serial number and the transcription pedal has [T]

Install the same disk with the E the driver is there, the control in Control Panel is there, but the foot switch does not work with the software. Put in the serial number with the [T] and foot switch works first time!

If you uninstall the play and then reinstall with the [T] serial number you do not need to reboot or even unplug the foot switch from the USB.

Bingo