SOURCE: rca p52927 chassis ptk 195 wont power up all of a sudden
Any TV can have a bad solder connection problem after
moving.Unfortunately,the fix may not be easy.
1) pull light box out of cabinet or hire someone to do it
2) slide/tilt for servicing main PC board
3) examine solder connects with magnifier--solder any/all
bad connects,esp around microprocessor
4) Check horiz output xistor =if ok,re-assemble,test
If shorted,replace with first quality transistor and solder
any/all suspect connects in horiz drive circuit,then assemble
Let me know......T.
SOURCE: color misaligned in RCA P52927
Hi,sounds like the convergence power supply reg.has failed,when this ic fails the adj. projection tv leaves the menu,this ic is located on the board above the board with 6 heat sinks on it mounted on the black plastic,its the ic that is heawt sinked on this board,part number is 215530
SOURCE: RCA P52927 volumn control
The buttons on control panel are there for convince not for everyday use. Use remote, your control panel is bad.
Chances are you have 3 bad capacitors 2200uf 16v cp150/ cp111 is 330uf 35v / cp114 is 220uf 35v they are green with gold writing on them.
193 views
Usually answered in minutes!
×