RCA HD56W58 56" TV Logo

Related Topics:

Anonymous Posted on Nov 15, 2007

HD61W66YX60 I HAVE A 61" HDTV model # HD61W66YX60 there is currently no picture but a few bowed lines going across the top of screen all the way across in the top six inches of screen the lines are thin and different colors. The sound works perfect- This just happened today and TV has worked perfectly in the past. Purchased TV 16 months ago. TV is still under warrenty but would like to know what problem is. Thanks in advance.

  • Anonymous Feb 17, 2008

    still have picture but picture is bowed and has some double exposure in the colors

  • Trixy434 Feb 20, 2008

    Our picture is actually bowed and the convergence function is no longer an option, it has just completely disappeared. Our TV RCA HD61W66 is also under two years old and we have a warranty but like you I just want to know what caused this (still waiting on service Tech).

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 60 Answers
  • Posted on Nov 22, 2008
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Nov 21, 2008
Answers
60
Questions
0
Helped
38257
Points
127

This is a convergence issue. it is caused by one of three things
1. a bad convergence board
2. a bad fuse feeding the convergence circut
3. a bad relay feeding the convergence circut

whatever the one it is they all have the same result, an inoperative convergence curcut. needs service .

if it is still under warranty, great. If not the parts can cost up to $300 and labor can be the same

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why did my Quasar TV (1993) picture go out again, blue line across the screen? We had it repaired, 3 months later no picture, same blue line.

Sounds to me like something else is causing those parts to fail. It should be under warranty but depends on the repair shop. Why not just buy a new one.

Here are some choices for a new one:

RCA 42 LED42C45RQ Class LED 1080p 60Hz 3 4 ultra slim HDTV


Why did my Quasar TV 1993 picture go out again blue line across the screen...

LG 24 Class 23 6 Diag LED 720p HDTV Black

RCA LED32G30RQ 32 720p 60Hz Class LED HDTV Walmart com
0helpful
1answer

Picture problems

Is it one color that has moved? Sounds like a convergence problem. Find a channel with a fixed picture, or if you have digital cable or satellite pull up a guide, something with a straight line across the screen. You will likely see one of the colors is bowed or or shifted. You may be able to adjust that with your remote under the "convergence" adjustments in the menu. If it will not adjust it will need work done to the convergence circuit. Not a DIY project.
0helpful
1answer

Red line across top/blue line across bottom of screen

Adjust your convergence. Under menu I think its the last choice at the bottom of settings or picture menu
0helpful
1answer

Picture problems

check for cold solder joints around the flyback transformer and a open pico type fuse very close to it. they are rectangle in shape and ususually the one in the middle of the three is the culprit. The problem is in the pincushion circuit
0helpful
1answer

APPROXIMATELY 3" GRAY LINE ACROSS THE TOP OF MY TV

Do you happen to have a cable box? (reset cable box also by unpluging it). is that line also showing on dvd player on different input?
0helpful
2answers

Goofy intermitent picture (bows with wiggly fibers across screen)

Convergence amps are going bad replace these and you will fix your intermittent problem.

josh
0helpful
1answer

Blue haze around image, yellow streak

the tv color circuit is off frequency change the color ic take a look on the crystal that gives the 4.8.mhz burst could be that it needs to be replace dont rule out the video IF change the two ICs you mention.good luck.from the look of your tv screen that is my conclusion.good luck.email me at [email protected]
0helpful
1answer

No picture have sound

sounds like your IC's took a dive again. Did you change them or a shop? You have to also make sure that when you change the IC's that you put plenty of heat sink compound on the back of the IC's and do not use the cheapy IC's that you can get for 20 bucks or less as I have found they do not last. This convergence board should be available as a complete board. Good Luck
0helpful
1answer

Picture Distortion

you have a convergence problem.. If you understand how this works then you can go into the set find the convergence ic's and replace them and sometimes you need to do some alighnment as well. Its always best though to let a service tech do a job like this as he will have all the proper equipment to adjust and troubleshoot the set Good luck
Not finding what you are looking for?

117 views

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...