Samsung HLR5067WX 50" Rear Projection HDTV Logo

Related Topics:

Jim Ryan
Jim Ryan Posted on Aug 16, 2015
Be the first to answer

When powered on screen appears and then goes off. The standby/temp - timer - lamp lights blink

Standby/temp = green timer = red lamp = red

Answer This Question

5 Related Answers

Silvia Kimbrough

  • 1 Answer
  • Posted on Jun 06, 2008

SOURCE: t.v. will not turn on. flahes "lamp" then no picture!

I have a picture but the tv will periodically turn itself off during the day and then flash the 3 blinking lights...anyone know what the problem could be. We can fix it ourselves if we knew for sure what it is.

Ad

Nick DelRegno

  • 49 Answers
  • Posted on Jan 24, 2009

SOURCE: Turning off

Three blinking lights indicates a lamp problem.  This can be from A) a bad lamp, B) bad ballast C) bad Light Engine/DMD Board.  Try replacing the bulb first.  As with any lamps, it has a limited life.  If that doesn't work, you can try the ballast next.  If that doesn't work, it's time to take it in to a certified repair center for diagnostics.  Here is a page from the service manual on the three blinking lights.

Rexter1

  • 40 Answers
  • Posted on Mar 11, 2009

SOURCE: Immediately Shuts off with blinking light codes

I suggest doing a google search using the tv model # and brand.
I have learned myself that different big screen tvs seem to each have their own common problems. I have read before of power supply issues that cause what your describing.

TONY BIGNELL

  • 147 Answers
  • Posted on Apr 15, 2009

SOURCE: TV won't stay on. Green & Red light timer-lamp (Green) stand by/temp (red) flash.

Most likely needs a new lamp. Easily done yourself.

Anonymous

  • 53 Answers
  • Posted on Apr 23, 2009

SOURCE: sound but no picture - won't stay on

you may check your lamp first. other than that i would say a faulty mains board.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Replaced bulb yesterday worked fine. Today light will not turn on. projector turns on both lights green for 10 seconds, then power goes red and status blinks green for about 5 seconds, then status light...
green green is power on, normal
then it tries to light the lamp, but it can't so the protection circuit comes activated.
you get red and green blinking

Then it goes to standby, red and off.

so something has happened to the lamp, or lamp ballast power supply.
Take the lamp out and check if all is OK with the 2 terminals in the connector, and the leads to the lamp are intact.

Failing that, I would suspect the ballast lamp power unit
Read full answer
Mar 25, 2011 • Mitsubishi HC1600 Projector
tip

Error code by led indicator samsung SP67L6HX1X
<img src="mas_baz.jpg" /><br />There are three LED indicators. LAMP, TIMER, STANDBY/TEMP. Each Led or combination leds indicated problem.<br /> <ul> <li>LAMP blinking : The picture will automatically appear in about 15 seconds.</li> <li>TIMER and STANDBY/TEMP blinking : A cooling fan inside the set is not operating normally.</li> <li>LAMP and STANDBY/TEMP blinking : Lamp cover on the rear of the set is not properly shut.</li> <li>STANDBY/TEMP blinking : Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off.</li> <li>All LED blinking : Lamp may be defective.<br /></li></ul>It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. The TV has a fan to keep the inside lamp from overheating. You'll occasionally hear it working.<br /><br /><br />
Read full tip
on Mar 29, 2011 • Samsung HL-R6167W 61" HDTV
0helpful
1answer

Put a new bulb in that i got from e-bay, tv switches on perfect but after a little while it turns itself off then red and green light start to flashing. i don't know what the problem is ????
Hello, I try to help. But your questions not spesific.
Below are conditions lamp indicators that appear blinking and solutions (for samsung) :

1. If Timer and Lamp blinking --> Auto timer on/off was been set, picture will appear ~ 25 second.
2. If Timer and Standby/Temp blinking --> A cooling fan inside the set is not operating properly.
3. If Lamp and Standby/Temp blinking --> The lamp cover on the rear of the set is not installed properly.

I hope that solve your problem.
Thanks
Read full answer
Mar 14, 2011 • Televison & Video
0helpful
1answer

Hello I have a Samsung TV Model# HL50A650C1FXZA I have 3 lights blinking 2 green and 1 red light what is the problem
Hello, I try to help. But your questions not spesific.
Below are conditions lamp indicators that appear blinking and solutions:

1. If Timer and Lamp blinking --> Auto timer on/off was been set, picture will appear ~ 25 second.
2. If Timer and Standby/Temp blinking --> A cooling fan inside the set is not operating properly.
3. If Lamp and Standby/Temp blinking --> The lamp cover on the rear of the set is not installed properly.

I hope that solve your problem.
Thanks.
Read full answer
Feb 22, 2011 • Samsung DLP HL-P5663W 56" TV
0helpful
1answer

When you turn it on, the green LAMP light goes on, then it clicks and the STANDBY/TEMP red light goes on, then clicks and back to the green LAMP light. It does this a few times, then The TIMER green light...
Hi,
Usually if all 3 indicator lights come on this could be the color wheel is not functioning or the DINe chip needs to be re-soldered. Be sure the lamp door is closed all the way, but the color wheel needs to be looked at first.
http://tvtechwork.webs.com/
Read full answer
Nov 17, 2010 • Samsung HLR5667W 56" Rear Projection HDTV
1helpful
1answer

1-Projector is in standby, so I hit the power button. 2-Green power light comes on, and lamp light flashes green (warm-up). 3-Lamp light goes solid green, but no picture. (However, if you look at the lens,...
I think it's capacitor issue on the power supply board. open it, look for power supply board and fine bloated capacitor and replace it.
Read full answer
Feb 15, 2010 • Sharp XR-10S DLP Projector
1helpful
1answer

I own a Samsung HL-R5067W 50'' DLP. Set is about 3 years old. Recently I heard a loud pop while viewing, picture distorted, but never went blank. I turned set off. When turned on again a loud whining noise...
Check your color wheel. There is a DIY guide for replacing the color wheel. Mine did the same thing yours is and my color wheel was all busted up. Unfortunately after replacing the color wheel my set continues to do the same thing, but this could mean I need to replace the ballast as well.
Read full answer
Sep 20, 2009 • Samsung DLP HL-P5663W 56" TV
2helpful
1answer

I own a Samsung HL-R5067W 50'' DLP. Set is about 3 years old. Recently I heard a loud pop while viewing, picture distorted, but never went blank. I turned set off. When turned on again a loud whining noise...
The color wheel needs replacing. Thats causing the whining and it will also make the lamp light blink.
Read full answer
Sep 20, 2009 • Televison & Video
2helpful
3answers

I try to power on my samsung HLR617W, the lights on the front flash, Lamp flashes in green, Timer flashes in green and standby temp flashes in red. I have replaced the bulb but the problem remains.
you need to test the lamp with a ohm meter, to see if its working correctly
Read full answer
May 14, 2009 • Televison & Video
0helpful
1answer

No picture and no sound
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Read full answer
Mar 11, 2017 • Samsung Televison & Video
Not finding what you are looking for?

View Most Popular

HLR5067WX 50" Rear Projection HDTV

  • Televison & Video

Related Question

Replaced bulb yesterday worked fine. Today light will not turn on. projector turns on both lights green for 10 seconds, then power goes red and status blinks green for about 5 seconds, then status light...

  • Mitsubishi HC1600 Projector

113 views

Ask a Question

Usually answered in minutes!

Popular Questions

Numerous white spots on Smasung DLP TV

Samsung DLP HL-P4663W 46" Rear...

Samsung DLP will not turn on

Samsung HL-R6167W 61" HDTV

Samsung HLP4663W color wheel replacement

Samsung HLP4663W 46" Rear Projection...

Samsung DLP Check Fan #3

Samsung HLN467W 46" Rear Projection...

My Samsung HL-R5667W turns on for a quick flash

Samsung HL-R4667W Rear Projection...

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. HLR5067WX 50" Rear Projection HDTV...

HLR5067WX 50" Rear...

Loading...