Need a plug pinout as the plug for the unit was lost

Here is the wire pinout for the power plug of the Pioneer AVH-P2300 car stereo:

1. Yellow: Constant 12V (Battery)
2. Red: Ignition 12V (Accessory)
3. Black: Ground
4. Blue: Power Antenna Control
5. White: Front Left Speaker (+)
6. White/Black: Front Left Speaker (-)
7. Gray: Front Right Speaker (+)
8. Gray/Black: Front Right Speaker (-)
9. Green: Rear Left Speaker (+)
10. Green/Black: Rear Left Speaker (-)
11. Purple: Rear Right Speaker (+)
12. Purple/Black: Rear Right Speaker (-)

Question edited for clarity and add maker.
Question moved to model category.

Pontiac Sunfire 2002 Head Unit pinout

https://old.pinouts.ru > ... > Pontiac pinouts
Jan 13, 2022 - Meaning of Head Unit pinout signals ; Audio pins ; FR+ or RF+, Front right speaker out ; FL+ or LF+, Front left speaker out ; RR+, Rear right ...

2000 Pontiac Sunfire Car Stereo Wire Colors and Locations

https://www.the12volt.com > installbay > stereodetail
2000 Pontiac Sunfire Stereo Wiring. Constant 12V+, Orange. Switched 12V+, Yellow. Ground, Black. Illumination, Gray. Dimmer, Brown. Antenna Trigger, Pink.

try service manual, manualslib.com may have what you need.

Most motherboard manuals diagram and describe the pinouts for most plugs on the board. You should be able to determine the answer by looking at the mfg website.

As you did not specify what you are looking for, no one can answer your question.

RJ45 pinout link here:
RJ 45 pinout
Hope this helps.

the prq can be used after a head unit before crossover and amps. it is a preamp/equilizer and you must have an orion amp in the signal chain that uses the 5 pin din plug to provide power to the prq via phantom power. if you have a crossover it must be a brand with the same 5 pin din pinout input and output. the din pinout is 1\+15v, 4\r. ch input, 2\ground, 5\l. ch input, 3\-15v. left to right or clockwise on din. the power can be supplied to the prq with an optional 100 pps power supply unit. rca from head unit feed the input and the 5 pin din is the output .

http://pinouts.ru/Home/sony_dcra_pinout.shtml here is the pinout from the camera.if u cand handle it work but u need some exprerience to do this.to buy some cable ...i think nope

no - the harness is $17 or less.
Even Metra makes one (pictired above)
In my shop I charge $17 for the metra plug.
eBay it.
Metra part# AL16-0001 or al2x8-0001
CLICK HERE for an eBay auction for an original ALPINE plug. $30
CLICK HERE for an eBay auction for a $2 (shipped) one.

Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FREE question.

Here is the circuit I use (I removed the cover and traced the DC pins back to the board, but I haven't tested them yet)

I am using a standard AC cord plugged into the yellow contacts in the drawing, works great.

I don't really know. Recommend contacting a local car audio professional or Clarion customer support directly here:

https://clarion.com/xe/en/user-support/inquiry/contactus