Whirlpool RBS245PDS Electric Single Oven Logo

Related Topics:

Posted on Nov 15, 2007
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Oven Temp I set the oven to pre heat, it hits desired temp but then 5 minutes later the temp has dropped 100 degrees. Need to continually check for desired temp.

Answer This Question
  • mutaler Nov 19, 2007

    After it drops temp shut it off and reset. Then it appears that the broiler may be coming on when you reset the temp cause items are getting well done on top more than the bottom. But I do see the bottom element on.

  • 1210 May 14, 2008

    Oven does not maintain temp. Drops 50 to 100 degrees and never maintains the temp set on the thermostat.If I want 350 I have to set the over at 420.

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Sergeant:

An expert that has over 500 points.

  • Expert 288 Answers
  • Posted on Nov 15, 2007
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Sergeant:

An expert that has over 500 points.

Joined: Nov 02, 2007
Answers
288
Questions
3
Helped
260008
Points
581

After it drops temperature, how do you get it back to the desired degrees? It sounds like the thermostat isn't keeping up.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Bottom oven isn't heating to desired temp. Considering swapping the heating elements to see if one is faulty - thoughts?
try thermostat first. verify heating elements operational, if so check if tstats are same. swap if so, If not jump out tstat and see if higher temp achieved.
Read full answer
Sep 20, 2015 • Thermador PODC302 30" Double Electric Wall...
0helpful
1answer

Gas oven doesn't get hot enough
Good Morning Friend,

I understand that your Frigidaire oven will not heat to temperature if you set it to 350 degrees. I see that you have to set it to 450 degrees for it to heat up, and then turn it back down to the desired temperature. Please try resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power, set the clock and try setting the temperature to 350 degrees. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP
Read full answer
Jul 08, 2014 • Frigidaire Ovens
0helpful
1answer

Temp shows 400 but oven is at 300
Is it continues to heat up then its working fine...if it continues to heat pass 400 then your have a thermostat problem and the oven is out of control. I do believe that the display is not an actual reading of the oven temperature, instead it is a reading of where the operator has set the temperature to . I have yet to see an oven with a actual reading temperature display.
Read full answer
Dec 01, 2013 • GE Profile JTP18 Electric Single Oven
0helpful
1answer

I have just installed a Maytag built-in double oven to replace my old one (still working.) I shut off circuit breaker and reconnected wiring. The Control Panel and indicators on the digital readout all...
How many active terminals are there at the main terminal block in the new oven. Is this a single or 2 phase supply. Have you connected the active supply to all active terminals. If only half of the oven is working it sounds like it could be a problem at the terminal block. If so, you need to put a loop or bridge wire to the 2nd active terminal.
If all this was done correctly when connected the only other thing it could be is the electronic clock needs to be set to manual mode for the oven to work correctly.
Read full answer
Feb 26, 2011 • Maytag CWE5800A Electric Double Oven
0helpful
1answer

GE free-standing electric range Pre-heat oven temp is about 50 degrees less than what is set (i.e. set digital display to 400 and over only reaches about 350). Is there an adjustment that can be made to...
We have a new GE Range and the signal beeps at about 100 degrees below the temp which we have set . The dealer replaced the sensor and the control circuit, but there was no change.
A service tech from GE came to our house and explained that the new ovens have a bottom heating element which is covered and therefore heats the lower part of the oven more slowly; but the exposed upper element heats more rapidly and the sensor is located near the upper element. We were advised to wait for about 15-20 minutes after the beep before placing the food in the oven. Judging from the number of comments found online, this seems to be a feature of newer ranges.

SnapDoc
Read full answer
Nov 08, 2010 • GE JKS05 Electric Single Oven
0helpful
1answer

Temperature varies
very normal but only during pre heat / once the oven is stable tempt should be 5 to 10 deg above and below the tempt setting and if not replace the oven temp sensor located inside the oven on the back ..mm
Read full answer
Jul 12, 2010 • GE JGRS14 Gas Single Oven
2helpful
1answer

The oven pre heats to desired temp and then loses
SOUNDS LIKE THE TERMOSTAT IS FAULTY REPLACE IT AND YOUR OVEN SHOULD WORK FINE.
Read full answer
Nov 09, 2009 • Thermador SMW272 Electric Double Oven
1helpful
1answer

Hi. I have a ge convection oven(JCTP17) that has been working great until recently. I bought a Taylor oven thermometer model number (503) To check othe oven temps to see how accurate the oven is. I do a...
The Taylor oven thermometer you bought is decent at best. It is most likely the sensor inside the oven. Has your clock displayed any fault codes? F, followed by a number? Changing the sensor will probably correct the problem.
Read full answer
Aug 19, 2009 • Ovens
0helpful
1answer

Temp indicator chimes although temp is really 100 degrees low.
Yes you do need a new thermostat, just make sure that the sensor is not obstructed by anything. first.
Plz rate my solution
Thanks.
Read full answer
Dec 18, 2008 • Jenn-Air WW30430P Stainless Steel Electric...
0helpful
1answer

Kenmore electric oven
Sears Kenmore Electric Wall OVen, Mod.#9114012192 purchased in 1993. Set oven for 425 degrees, reaches set temperature, stays on about 10 minutes and temp. display goes out and oven starts cooling down. Will not stay on desired temp.to cook. Can you tell me what my problem is? Thanks. Doug.
Read full answer
Dec 02, 2007 • Ovens
Not finding what you are looking for?

View Most Popular

RBS245PDS Electric Single Oven

  • Ovens

Related Question

Bottom oven isn't heating to desired temp. Considering swapping the heating elements to see if one is faulty - thoughts?

  • Thermador PODC302 30" Double Electric Wall Oven 4.7 cu. ft. True

Related Topics

429 views

Ask a Question

Usually answered in minutes!

Popular Questions

Whirlpool oven ''feature not available''

Whirlpool 30" Self-Cleaning...

Whirlpool accubake self clean oven. Error code(s) E2 - F3?

Whirlpool RBS305PDS Electric Single...

After a power outage my oven does not work and only the left half of the stove is working, any thoughts?

Whirlpool Ovens

The outer glass of my oven door shattered, can I

Whirlpool Ovens

How do I use the steam clean self-cleaning oven?

Whirlpool 30" Self-Cleaning...

Top Whirlpool Ovens Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...