Question about NorStar T7316E Corded Phone
Inactive feature on call pilot 150
rebooting the system but problem unchange
Posted on May 30, 2011
First make sure u r using Voicemail system which is either Star talk or call pilot.
If u r any one of this then only u can use F 981, 982 , 983 or 985. Its a feature code of voice mail.
If u r using either of this and still gettin inactive feature, then try with rebooting The Satr talk or call pilot i.e. switch off from mains wait for few mins and switch it back on.
After rebooting it will take 15-20 mins to boot up the system and after that u can use these feature.
Posted on Jul 12, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Dear customer..here is the solution
Sometimes when you put a new (or alternate) voicemail system on a Norstar switch, The feature codes that accessed the old system stay in the KSU memory. If this is the case all of your feature codes will appear inactive even if the voicemail system is operating correctly.
To fix this issue you need to run an External Feature test (XFtest) to identify and remove the leftover codes from your KSU memory. You must have a programming set to access this menu (M7310, M7324, T7316).
Power down the Voicemail unit. Remove connection to voicemail ports from KSU.
1. Press [Feature] **938378 (XFtest). The password will be 266344 (Config).
2. Your display will read Feat code: and you will have options First and Exit.
3. Press First. The first stored feature code will appear, and you will have options Test, Back, and Next.
4. Press Test. Your options will read Remove and OK. Press Remove.
5. Once the feature code is removed, press Next to go to the next code.
6. Do this with all codes until your display reads None Registered
Restore connections to the voicemail ports from the KSU. Power the system back up.
The feature codes will be restored to the correct defaults with the completion of the voicemail power-up cycle.
Posted on Jul 09, 2008
SOURCE: Norstar: Inactive Feature (981)
This generally happens from one of two things. Your voice mail system is connected to your phone system through a station port. If it loses connection it will not communicate with the phone system. Loose wire or connection can cause this. or it has just crashed and will need repair or replacement.
First thing you want to do is unplug the unit wait 15 minutes and plug it back in. wait 10 minutes Try feature 981 from a set that has voicemail. if nothing. hit feature 985 from a m7310 set or a m7324 set not a m7208. If it comes back with inactive fearture now your connection between the units is bad or the unit itself is bad. If it comes back with the voicemail intercom # and you cant get into any mailboxes it has lost all programming.Try this first.
Posted on Oct 23, 2008
Try powering off the voicemail system and and then power it on again. I've had it happen many times that after a power failure they just don't boot up correctly.
Posted on Jul 30, 2009
Tips for a great answer:
Jun 11, 2015 | Nortel T7316E 2-Line Corded Phone
Mar 18, 2014 | Nortel Networks T7316E Telephone Platinum...
Dec 21, 2009 | NorStar Cics 6.1 & Call Pilot 100...
Jul 06, 2009 | NorStar Startalk Flash 2 Phone
Mar 29, 2009 | NorStar Meridian M7310 Phone
Jan 24, 2009 | Land Rover Range Rover Cars & Trucks
Oct 30, 2008 | Samsung U900 Soul Cellular Phone
Oct 22, 2008 | Nortel Business Series Terminal T7208 -...
Oct 10, 2008 | NorStar M7324 Telephone
Sep 26, 2016 | NorStar T7316E Corded Phone
Jun 15, 2015 | NorStar T7316E Corded Phone
2,668 people viewed this question
Usually answered in minutes!