Juki e code 808 solulation ddl8700-7 - Juki Sewing Machines

The E24 error code for the Juki CP-130 sewing machine usually indicates a problem with the thread take-up lever. Some common causes of this error include a thread take-up lever that is not properly installed or adjusted, a bent or damaged thread take-up lever, or a thread take-up lever that is blocked by lint or debris. To resolve the issue, check the thread take-up lever and clean it if necessary, and make sure that it is properly installed and adjusted. If the issue persists, you may need to have the sewing machine serviced by a professional.

Here it is in the manual:

JUKI DDL 8100B 7 Series Instruction Manual Error Code List

Usually there is an Error Code List in the manual.


JUKI Sewing Machine Instruction Manual Error Code List


...

Kindly read a manual or visit dealer close to you.

Perhaps it would be best to contact Juki Support.

Problem with Juki DDL 5550N 7 Sewing Machine Error Code E24

...

Perhaps this will help:

JUKI Sewing Machine Instruction Manual Error Code List

You may need to contact Juki for instructions on how to correct this error.

..

If the Error Code is not in the owner's manual, might be best to contact Juki Support.

...

Consult your owner's manual. The troubleshooting section will usually list error codes and how to correct them.

If the error code is not listed in the manual, you may want to contact a Juki technician for advice.

...

I could not find that error using the Manual that is on the Internet.
I suggest you call or email their Sales and Service in the U.K.

Their email is [email protected]

JUKI DDL 5530 DDL 5550 Parts Needles Service

email the sewvacdoctor.com & see if they can help with the code