Computers & Internet Logo

Related Topics:

A
Auyuittuq Posted on Jun 12, 2015
Be the first to answer

Date & time at beginning of system log wrong on Zyxel VSG 1432-B101

At the beginning of the system log a large number of the entries had 2014-01-01T00:00:10 as the date and time. Why didn't the correct date & time show? After the large number of entries with the above date & time subsequent entries showed the correct date & time. Might this have been just what happens during initial boot-up after powering on before the unit can pick up the date and time from the internet?

Answer This Question

5 Related Answers

A

Anonymous

  • Posted on May 07, 2008

SOURCE: eTrex Vista shows incorrect date

Thanks for the great advice. My problem is fixed!! Yay!

Ad
A

Anonymous

  • Posted on May 20, 2008

SOURCE: NO FUNCTIONS

Replace the Digital board

Anonymous

  • 1 Answer
  • Posted on Jul 12, 2008

SOURCE: time and date

I'm almost positive there's nothing wrong with your phone "ssandra". You set the day/time/year etc. on the base (answering machine) separately from the handset . . . you press a series of buttons. I've done it several times, but now after a move I can't remember how you do it, and I can't find the instructions I had. That's actually why I was on this forum (looking for the instructions). Since you posted your question last year, this probably can't help you now. But I thought I'd answer anyway . . .

Anonymous

  • 827 Answers
  • Posted on Jan 18, 2009

SOURCE: IRe: IBM 600E

Hi, sorry I was out last night.
Errors 00161/00163/00173 mean you need to replace the CMOS/BIOS battery and update the time, date etc, like you did.. and Error 00301 means a keyboard error. Just press CtrlAltDel past this.. or try using an external PS-2 keyboard..

So, when you startup and then get to the errors, just press CtrlAltDel to restart, then tap F1 to enter the Advanced Settings and try to load Windows in Safe Mode, and let it do a Scan Disk.

It's possible that the machine won't be able to load any hardware drivers for the machine because the CMOS information might have been corrupted due to the flat battery, but try and boot into Safe Mode anyway and see how you get on.

This is a really old machine but still has driver and troubleshooting support at the Lenovo website, and it might be fun and interesting to resurrect..

Hardware Maintance Manual - June 1999: ThinkPad 600, 600E
On pages 109 and 115of the attached pdf file (actual pages 103 and 109), the Li-Ion batterypack part number should read 12P4064 replaces 02K7018.
c.gif Battery test utility diskette - ThinkPad 600/E/X
c.gif
BIOS Update (Diskette) - ThinkPad 600
PCMCIA SelectaDock I/II driver for Windows 95/98 - ThinkPad 600, 770

c.gif Windows 98 installation supplement files - ThinkPad 600, 760, 765, 770
This is the Setup Guide for the thinkpad 600.

Of course, it may very well load Windows fine after a new battery and a scandisk and you'll find it has Windows 2000 on it, so maybe I'm jumping the gun with the Win98 stuff there, but let me kow how you get on..

Chris (ziraffa)

Oh by the way, if we are going to be using a different Solution thread this time, can you go back to the other page and rate it as Fixya! so that they can take it off the system? It saves the unrated pages filling up the servers..

Anonymous

  • 1 Answer
  • Posted on Apr 07, 2009

SOURCE: Problem opening the Configaration Page re: Zyxel P660R-61C Router

Try port 192.168.40.1

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

Password recovery for ZyXEL3480wfy
ZyXEL Router Passwords
Finding your ZyXEL router's user name and password is as easy as 1,2,3.

  1. Find Your ZyXEL Router Model Number


    Look in the left column of the ZyXEL router password list below to find your ZyXEL router model number.

  2. Find Your ZyXEL Router Username


    Look one column to the right of your router model number to see your ZyXEL router's user name.

  3. Find Your ZyXEL Router Password


    You know the drill. Look another column to the right to find your ZyXEL router's password.
Great! You've found the password and username for your ZyXEL router! What next?

Login to Your ZyXEL Router Using the Router Password
Try logging into your ZyXEL router using the username and password.

Don't Know How to Login to Your ZyXEL Router?


You can login to a ZyXEL router in three easy steps:

  1. Find Your ZyXEL Router IP Address


  2. Enter Your ZyXEL Router IP Address Into an Internet Browser's Address Bar

  3. Submit Your ZyXEL Router Username and Password When Prompted By Your Router

=============== OR: ===============

Forgot Router Password?
If you are having trouble logging in to your router, there is a good chance that your router's user name and password are still set to the default settings.
What should you do?
Login to Your Router Using the Default Router Password
Try logging into your router using the default username and password for your router.

Don't Know How to Login to Your Router?


You can login to a router in three easy steps:

  1. Find Your Router IP Address


  2. Enter Your Router IP Address Into an Internet Browser's Address Bar

  3. Submit Your Router Username and Password When Prompted By Your Router

For more information on how to login to your router please see our Free Guides.
Still can't login to your router even when using the default username and password for your router?

Reset Router Password To Default Settings

(Use this as a last Resort!)
Find Your Default Router Password
Simply select your router manufacturer from the list below to display the default router passwords and usernames.
Read full answer
Nov 02, 2014 • Zyxel Computers & Internet
0helpful
1answer

WLAN/WPS won't stop flashing orange
on netgear router it said if improper wps code was entered 4 times it would cause wps to blink slowly and disable it. It said the router had to be reset to factory, then wps would start working again. when you press wps and do autosetup on device it gives out this key and device will auotlink. you can only wps link with one router or you will cause error.
Read full answer
Apr 10, 2014 • Zyxel Computers & Internet
5helpful
1answer

Change date sharp el-2630PIII
"GT": Grand Total
"•": Neutral
" ": To set up date, time, conversion
rate, and tax/discount rate, place the
switch at the "RATE SET" position.
Date:
• Enter in the order of month, day
and year, then press to
complete the entry.
• Use to separate month, day,
and year.
• When is pressed, the number
entered is evaluated and displayed
as "date" if the value is within the
following range; "Error" is
displayed otherwise, and the
previously set date is restored.
Month: 1 - 12; day: 1 - 31; Year:
2000 - 2099 (in 4 digits) or 00 - 99
(in 2 digits)
Time:
• Enter in the order of hour, minutes,
then press to complete the
entry.
(There is no entry available for the
seconds value. The clock starts at
zero second.)
• If the hour/minute digit is less than
10, it is not necessary to enter the
first digit "0".
• Use to separate hour and
minute values.
• When is pressed, the number
entered is evaluated and displayed
as "time" if the value is within the
following range; "Error" is
displayed otherwise, and the
previously set time is restored.
Hour: 0 - 23 (24-hour system for
the hour entry), Minute: 0 - 59
Read full answer
Dec 19, 2010 • Sharp EL-2630P Calculator
0helpful
1answer

When I connect the vsg1200 v2 the download speed is good (speakeasy speed test) also the upload speed is good. When you access the internet all of the web pages are painfully slow to load. If the...
Hi, I experience also performance issues with the VSG 1200. Did you found a solution in the meantime? I already have the latest firmware installed. I notice that within the internal LAN ping times are sometimes too high to the device
Read full answer
Oct 07, 2010 • Zyxel VSG-1200 V2 Router
2helpful
1answer

Setting the date
By programming, these are programs 000,001 and 002 for Date and Time, Speed Dial number, and Speed Dial Name.

Date and time programming is easy, I don't wish manual speed dial entry on my worst enemy. However, if you like a challenge, I'm going to give you a link to the programming manual.
http://public.carl.airpost.net/TDA/TDA_PTPM_32.pdf

Start with page 12, since you'll need it to get into programming.
Your key sequences begin on page 16. After you put the first 5 or 10 speed dial numbers and names in, you'll get the hang of entering names in the directory. Nothing changes until you press ENTER or STORE. Each speed dial number starts with a trunk access code (usually 9) as part of the number. In name entry, each time you press the key it changes a letter. In a TDA IIRC 7 presses of the 2 key will get you ABCabc2.

Carl



Read full answer
Mar 19, 2009 • Panasonic KX-T7630 Corded Phone
0helpful
1answer

Serial number overlap after factory reset
There is a work around for this issue. The account logs can be sorted on date, which puts the latest entries on top of the pile, irrespective of the S/N.
Read full answer
Jan 05, 2009 • Zyxel G-4100 v2 WirelessHot-Spot Gateway -...
24helpful
3answers

Gmail redirect loop
had the problem on old computer...turned out to be date/time stamp. resetting date/time solved the problem. also had the issue pop up on new laptop w/ windows 7 ie. turned out to be in tools...internet options...trusted sites...sites. somehow i had added gmail.google.com to trusted sites and gmail was looping between http and https. removed the entry and problem disappeared.
Read full answer
Dec 29, 2008 • Google Gmail
2helpful
2answers

Svchost error with zyxel p 600 series
your operating system is corrupted..........
Read full answer
Dec 05, 2008 • Zyxel Prestige 841 (91-004-226010) Modem
0helpful
1answer

Change the time
Depending on the software of the Norstar it is connected to, you would log in to the key system by using Feature **23646 and then follow it up with the administration password.

If this is a pre 1.0 system, i.e DR5.1 do the following. If not, go to the bottom and click on the link and find the manual for the system your phone is connected to. Generally the system coordinator guide will have what you are looking for.
Setting the date
Begin with the display showing

l.Sys speed dial
1. Press [NEXT] (second key from the top on right for a 7310) twice.
2. The display shows 3.Time and date.
3. Press [SHOW] (first key on the top on the right for a 7310)
The display shows the time, for example, Time 01:00.

- All times and dates must be entered using numerals. For
example, February would be entered as “2”.
- The time may be entered in either 12 or 24-hour format. If the
display is in English, and the hour entered is less than
thirteen, the display prompts you to specify “am” or “pm”.

Press [Show] This will open the time change function. Simple rule. If you want to modify a value, press [CHANGE] and you'll get a cursor. Once you're done with that entry, press [NEXT] to go to the Minutes, press [CHANGE] etc...

I have also included how to change the date below.
Press [Next].
The display shows the date, for example, Date 31 Mar 91.
4. Press CHANGE (softkey under screen). The display shows Year: 88.
5. Set the year.
a. Press CHANGE.
A cursor replaces the number on the display.
b. Enter the year using the dial pad.
For example, press a a to enter the year 1990. ?
c . Press [Next] The display shows the month, for example Month: 01.
6. Set the month.
a. Press [CHANGE]
A cursor replaces the number on the display.
b. Enter the month using the dial pad.
For example, press 02 to enter February.
c . Press [Next].
The display shows the day, for example Dar: 01.
7. Set the date.
a. Press CHANGE
: A cursor replaces the number on the display.
b.” Enter the date using the dial pad.
For example, press 14.
Read full answer
Apr 03, 2008 • NorStar M7324 Telephone
193helpful
7answers

Canon MP11DX
press the date/time button
press and hold the = button
once blinking set the date
press the = button again
press the date/time button
press and hold the = button
once blinking set the time
the "x" button changes A / P
press the + button again
Read full answer
Feb 29, 2008 • Canon LS-100TS Calculator
Not finding what you are looking for?

View Most Popular

Computers & Internet

Related Question

Password recovery for ZyXEL3480wfy

  • Zyxel Computers & Internet

177 views

Ask a Question

Usually answered in minutes!

Popular Questions

Change NAT to open

Zyxel P660HW-D1 Router

Zyxel Prestige 600 series

Zyxel Prestige 841 (91-004-226010)...

DRIVERS FOR MODEM ZYXEL PRESTIGE 600 SERIES

Zyxel Prestige 600WH Wireless Router...

Http://198.162.1.1

Zyxel Prestige 334 Router

NAT 3 in PS3 Router Zyxel P-660HW-T1 v2

Zyxel P660HW-D1 Router

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top Zyxel Computers & Internet Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66835 Answers

deton8 von Splosion

Level 3 Expert

3342 Answers

Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
ES-2108-G_3.60.pdf. user-manual-8PORT...

Zyxel 8PORT Man L2...

PDF Manual
NBG-510S_UG_v1-00_2007-8-13_Edit.pdf....

Zyxel NBG-510S -...

PDF Manual
Http://www.zyxel.co.uk/upload/doc/NBG-...

Zyxel NBG318S Kit...

Loading...