How to remove error code M2 - Office Equipment & Supplies

https://www.copytechnet.com/forums/konica-minolta/62595-konika-minolta-bizhub-163-error-code-m2.html

M2 Call service.Maintenance M2, M1 Call service errors.To remove this error do the following steps.1-Press utility button on panel.2-Now press these buttons one by one, Press Stop, then zero, again zero, then stop,then press zero.3-its the code to get into service mode.4-After pressing above mentioned buttons you will enter into service mode.5-Now select service choice option.select it by pressing OK button.6-In service choice option you will see Maintenance count option.7-Select it by pressing Yes or OK button.8-There will be three options 0,1,2.9-Select 1, it will show a new menu, with numbers, now press C button to clear the counter.After the counter is cleared.Select 0 and press Reset button.

Sounds like a drum motor is going bad. The extra resistance from the thicker paper may be exposing a weakness in one of the drum motors. They aren't terribly expensive but figuring out which one it is might be troublesome on top of the removal and instillation process.

see if this link helps you out... konica minolta bizhub 195 error code M2 Google Search

http://www.copytechnet.com/forums/konica-minolta/62595-konika-minolta-bizhub-163-error-code-m2.html

You need to go into the service mode and then reset the supplies life counter.

Here is a website that has a list of Sharp Error Codes

Also here is a list of the drivers and copies of the
Sharp AR-M-205 owners manual and drivers


Hope this helps

You did not let us know the secret of what make and mode of machine you have..... I'm going to take a SWAG..... You have a Minolta or panasonic copier???? M2 is for a PM counter

M2 Call service.Maintenance M2, M1 Call service errors.To remove this error do the following steps.1-Press utility button on panel.2-Now press these buttons one by one, Press Stop, then zero, again zero, then stop,then press zero.3-its the code to get into service mode.4-After pressing above mentioned buttons you will enter into service mode.5-Now select service choice option.select it by pressing OK button.6-In service choice option you will see Maintenance count option.7-Select it by pressing Yes or OK button.8-There will be three options 0,1,2.9-Select 1, it will show a new menu, with numbers, now press C button to clear the counter.After the counter is cleared.Select 0 and press Reset button.