How do I change the combination? - Home Security

Safes with dials are a little more complicated. NEVER close the door after changing the combination. Practice the opening sequence with the door open. If you did it wrong, you can reset and try again

https://www.google.com/search?q=Sentry+Safe+1250.+change+the+combination

Google

make model manual
or
make model change combination

It is impossible for us to guess what you have. Here are a few just for fun!

"Set-Your-Own" Combination Locks Instructions ' FAQs

https://www.masterlock.eu > ... > FAQs > Padlocks

Q: How do I set or reset the combination on my bike cable lock model 8221, 8231, 8120, 8190, 8226?

Change my combination? - S&G - Sargent & Greenleaf

https://sargentandgreenleaf.com > knowledgebase > kno...

Do not remove lock cover. If an error is made, re-dial the entire combination. A U8 change key is required to change the combination. If you ...

Support FAQs ' Master Lock

https://www.masterlock.com > Support

Q: How do I set or reset a Master Lock combination padlock that has a ... Q: How do I change the combination on a Set-Your-Own combination lock model #643D?

How do I set or reset the combination on my Lock Box?

https://www.snapsafe.com > support > faqs > how-do-i-...

Begin by opening your Combination Lock Box. To open a new lock box for the first time: Move all 3 digits to 0-0-0. Make sure all digits are centered on the ...

link below might help
https://www.google.com/search?q=change+the+combination+on+my+Everbilt+6in+combination+locking+hasp&oq=change+the+combination+on+my+Everbilt+6in+combination+locking+hasp&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

Need to know the make and model.

1. Open the lock with the factory preset combination of 0005.
2. Find the tab on the end of the part of the locking mechanism that has the numbers.
Combination Reset Tab
3. Flip the tab up (with the combination set to the open combination). When you flip the tab up, you disengage the number dials from the tumblers, so that you can reset the combination without changing the position of the tumblers.
4. Change the combination to the desired combination.
5. Flip the tab back down. The dials are now re-engaged with the tumblers.

The Deputy Series Owner's Manual is at...
http://winchestersafes.com/ownersmanual.aspx

Your screwed.

These sentry safes dial combinations are not built to be changed as they have no key change hole. Switching the order of the tumblers could be done by a trained locksmith. I would suggest buying the electronic sentry safes as these safes can be reprogramed.

FOR YOUR SECURITY THE
COMBINATION MUST BE CHANGED
WHEN THE LOCK IS INSTALLED.
The door must be open.
On models with the passage feature, make
sure the passage feature is disengaged: turn
knob or key should be in vertical
position (A) (see figure 14-1).
1. Insert the DF-59 control key (B) into the
combination change plug assembly (C)
and unscrew the cylinder by turning the
key counterclockwise. Remove the combination
change plug to gain access to
the combination change sleeve (see figure
14-1).
2. Turn the outside knob once clockwise
(all the way, until it stops) then release.
The latch should not retract (see figure
14-4).
3. Enter the existing combination. On new
installations, use the factory-set combination:
depress 2 and 4 simultaneously,
(release), then 3 (release). You should
feel a slight click as each button is
depressed.
4. Insert the spanner wrench as shown in
Figure 14-2 to engage the combination
change sleeve (A). Gently turn the
spanner wrench clockwise to the stop
position (a slight click should be felt),
then turn the spanner wrench counterclockwise
to the stop position (A) (see figure
14-3). Remove the spanner wrench.
5. Turn the outside knob once clockwise all
the way until it stops, then release. The
latch should not retract (see figure 14-4).
6. Choose your new combination, write it
on page 26, then enter the new combination
— depress buttons care-fully
(a slight click should be felt as

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} You must have the factory combination in order to change the combination that was added to the safe and the factory combination can not be erased if that is the combination you are trying to erase.

All you have to do is press program & type in the factory code 2 times & that will erase the number you created.

Then to add a new combination all you have to do is: press program followed by 5 new numbers. Then to see if they new number works, just type in the new combination & the green light should come on & you have 4 seconds to turn the handle