How do I fix error 4001 (please put in original disk)(original disk is already in)?

Hi

This error is caused due to faulty thermister however; you can check the fuser unit for any jammed paper around the upper fixing roller and try to clean that area. After this is done try to clear the error by entering the service mode, to enter press Additional functions, #. Then go to #7 Printer and press OK, then go to #4 printer reset and press OK, yes= *. If the issue returns then replace the thermister. Hope this helps...please post back for further assistance.

Daniel

http://www.polaroidmemory.com/support/support_download.htm
If you have the Polaroid Burnmax32, firmware version 08, and a sticker on the top of drive says BCE3212IM, there is a firmware update, version .008G, you can try. I had the same problem of the drive just disappearing, and now it's fixed. You can get the update from this chinese webpage, so you may want to use a translator like altavista's babelfish to read most of the page:
http://www.teclast.com/topic.php?channelID=69&topicID=141
Just look for the firmware that's version "v.008G"
To use this update, you absolutely should know how to use mtkflash in dos from a startup disk. But this update package also comes with a bat file, "up.bat", that runs mtkflash for you, so it's a breeze. But FIRST, you have to use mtkflash manually to make a backup of your existing 08 firmware in case something goes wrong so you can always put back the original firmware. Good Luck.

4001 series timer is Paragon 120V mechanical timer.
http://waterheatertimer.org/Paragon-timers-and-manuals.html#4000
1) To disable the timer, turn off circuit breaker and take wires off of the terminals. Put wire nut over each wire, and circuit will no longer operate.
2) If you want the circuit to operate without timer, then take wires off terminals. Twist black wires together and cover with wire nut. Twist white wires together and cover with wire nut.
3) Buy Intermatic T-101 timer to replace Paragon 4001 timer
http://waterheatertimer.org/How-to-wire-T104-Intermatic-timer.html#T101

Lol then no sir you did not fix it. Sorry.
"to play this disc, please put it in an Xbox360" error is caused by one of two things.
1) Dead/Dying laser- Replace it or try to adjust the variable resistor on the laser lens. (USE a micrometer on the 20k setting and a 1.8mm flathead)
2) Incorrect drive key- If you "fixed" your initial problem by buying a new dvd drive, and putting it into the console. You no longer have the correct dvd key to match the Xbox360 motherboard. IF both drives are the same brand. You can simply remove the green pcb from the old drive and put it into the new drive. (be CAREFUL with the ribbons!!) If you did purchase a new drive, and already threw away the old drive, you're screwed the Xbox will NEVER play a game again, unless you download it from Xbox Live.

hi, unfortunately the design of the laptop's are very rigid and only allow the extension of the ram memory and hard disk capacity up to twice the disk that originally brought.

hey i had this problem and taking my hardrive out, starting a game, and then shutting it off and putting my hardrive back in worked!

try go to www.megagames.com and go to pc fixes on the side bar. Then you just simply fin your game, game fixes and download a no-cd crack. After this you put the cracked exe file in the folder where youre install files and other files for the game is( example. C:programfiles/EA GAMES/ sims life stories/ ) you might want to save your original exe file in another folder so if the crack don't work you have the original exe, but just put the crack in the folder where youre game is =)

I don't want to put you down or nothing but, buying the slim ps2 wasn't a great idea. If you bought the original ps2 it would've been better. The thing about the thin ps2 is the hd is small, the laser tends to become weaker faster. Go get the ps2 checked out someplace.

hi first thing to do - update your firmwear http://www.cd3o.com/support then look in troubleshooting: http://www.cd3o.com/support/doc/Product_Manual.pdf im sure it will do the work good luck