Unable to delete messages because there are no message to delete
That might be the Voice Mail Waiting Indicator which works
with the telephone service provider's 'VoiceMail' feature.
On the D1680 and similar handsets, it can be reset by:
1. press [menu]
2. scroll down to "Global Setup", press [select]
3. scroll down to "VMWI Reset", press [select]
4. scroll down from "No" to "Yes", press [select]
5. handset will chirp, blinking lamp goes out,
6. press [END]
Other models, check your manual. The model number
is on a small sticker under the battery in the handset --
enter this number at www.manualslib.com to get a free
copy of the User's Manual if needed.
Good luck!
--------------
SOURCE: message waiting indicator
Try holding the mute/find handset button on the base unit for about 5 seconds and the light should stop flashing.
SOURCE: message indicator light on Uniden PowerMax 5.8ghz handset
I'm having the same problem, too. However, the beeping continues and continues. Even when it stops, the light comes back on. Any other thoughts?
Blinded by the light
SOURCE: The VM indicator displays on my handset but there are no messages
I saw that someone else posted this solution and it worked for me. Unplug the power on the base unit and then reconnect the power while holding the "find hs" button. I just did this and it fixed my blinking light problem.
SOURCE: RED MESSAGE LIGHT CONTINUES TO BLINK WITH NO
FOUND SOLUTION ON ANOTHER WEBSITE.. HOLD DOWN FIND BUTTON ON MASTER UNIT FOR 5 SECONDS..PROBLEM FIXED..THANKS
SOURCE: Message waiting light will not go off
Found a user manual online. Solution is holding the "Find Handset" button in for five seconds, until the red light went off; that reset the message waitung light and message.
168 views
Usually answered in minutes!
×